Bykski
D6 PWM Water Pump Motor – Bykski CP-D6PB-X, 12 V
D6 PWM water pump motor for custom PC loops
The Bykski CP-D6PB-X is a D6 PWM water pump motor for circulating coolant in a custom PC cooling loop. It requires a separate pump top or pump-reservoir housing that explicitly supports this model. A 12 V DC lead powers the motor, and a separate PWM connection handles speed control and feedback.
Design Highlights
Brushless centrifugal drive
A brushless DC motor drives the impeller to circulate coolant. Bykski uses a ceramic bearing to support the rotor.
Separate pump core
The motor and impeller form a single core that seats in a matching pump top. Use the dimensions below to check clearance and confirm the exact pump model with the housing maker.
Key Specifications
| Model | CP-D6PB-X |
|---|---|
| Pump type | D6 brushless DC centrifugal pump core |
| Rotor | PPE |
| Bearing | Ceramic |
| Color | Black |
| Lighting | Unlit |
| Pump core (diameter × height) | 65 × 55 mm |
| Pump weight | 260 g |
| Rated voltage | 12 V DC |
| Working voltage range | 8–20 V DC |
| Input power | 22 W |
| Rated current | 1.85 A |
| Maximum input current | 2.0 A |
| Power connector | 4-pin Molex |
| Control connector | Separate 4-position PWM and tach feedback plug |
| PWM frequency | 1–100 kHz |
| PWM duty cycle | 10–100% |
| Maximum flow | 720 L/h |
| Manufacturer noise figure | ≤40 dBA at a horizontal distance of 1 m, with background noise ≤20 dB |
| Coolant types listed by Bykski | Ethylene glycol or propylene glycol |
| Coolant temperature | 0–70 °C |
| Ambient temperature | −25 to 70 °C |
| Ambient humidity | Below 90% RH |
Which Version Do I Need?
Choose the pump core if you already have a confirmed housing. For a new build, compare complete pump assemblies by what they include.
What's in the Box
Choose a compatible pump top or pump-reservoir housing separately.
Installation & Use
Have the matching housing, seal, mounting hardware, fittings, tubing, and coolant ready.
FAQ
What is the pump’s power draw?
Bykski lists 22 W input power and 1.85 A rated current at 12 V DC.
What happens with the PWM lead disconnected?
With 12 V power connected, the pump defaults to full speed when it receives no PWM signal.
Will my loop flow at 720 L/h?
Bykski lists a maximum flow of 720 L/h. Actual flow depends on the resistance in your loop.
What should I check before buying a pump top?
Confirm that the housing maker lists the CP-D6PB-X and follow its requirements for the seal, mounting hardware, and fittings.
- Keep the pump out of direct sunlight and away from direct UV exposure.
- Prime the pump with coolant before startup. Running it dry can damage it.











