• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Bykski

Intel LGA4677 CPU Water Block – Bykski CPU-SR4677-X

stars, based on ( 0 ) review
€64.19 piece
9items available
Contact Us
FormulaMod Official Store
Bykski · CPU-SR4677-X

Intel LGA4677 CPU Water Block

The Bykski CPU-SR4677-X is a CPU water block for Intel LGA4677 systems with a custom liquid cooling loop. Its copper cold plate transfers heat from the processor to the coolant flowing through the block’s jet microchannels. Two G1/4 ports connect the block to the loop.

Fits
Intel LGA4677
Ports
2 × G1/4
Cold plate
Copper

Compatibility

  • ✓Intel LGA4677

Before ordering, check which processor carrier your exact CPU requires and verify the mounting requirements in your motherboard manual.

Key Specifications

ModelCPU-SR4677-X
Block materialsBrass and copper
Cold plateCopper
Port threads2 × G1/4
Dimensions (L × W × H)123.7 × 80 × 26.3 mm, including mounting fasteners
Coolant channelsJet microchannels with 0.3 mm fins, up to 54 channels
Bykski CPU-SR4677-X angled top view showing two threaded ports and four corner fasteners

What's in the Box

1 × CPU water block with integrated mounting fasteners

Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.

Installation & Use

1
Power off the system and remove the motherboard. If you’re replacing a cooler, follow the motherboard manual to remove it.
2
Secure the CPU in its matching processor carrier. Apply your own thermal paste to the CPU and align the water block.
3
Seat the assembly on the socket, engage the metal clips, and tighten the corner fasteners in the diagonal order marked on the block.
4
Connect the block to your loop and leak-test it before powering on the system.

For the loop, you’ll need a pump, reservoir, radiator, G1/4 fittings, tubing, and coolant.

FAQ

Which fittings do I need?

Use G1/4 fittings at both ports. Choose fittings that match your tubing.

How much clearance does the block need?

The block measures 123.7 × 80 mm and is 26.3 mm tall including the mounting fasteners. Allow additional room above the block for your fittings and tubing.

Notes
  • Quality assurance 3 years

FormulaMod Official Store

Recent Reviews
+