Bykski
100mm Radiator with Copper Core for Custom Loops – Bykski CR-RD640RC-TK100
100 mm thick copper radiator for custom liquid cooling
The Bykski CR-RD640RC-TK100 is a 100 mm thick copper radiator that transfers heat from the coolant in a custom liquid cooling loop to the air. Coolant passes through five layers of channels, while air moves through the copper fins. There are two G1/4 ports beside the fins and two G1/2 ports on the end face.
Design Highlights
Five layers of coolant channels
The copper heat exchanger has 20 coolant channels arranged in five layers.
W-shaped copper fins
The fins transfer heat to the air. Bykski recommends high-static-pressure fans to move air through the core.
Ports on two faces
The G1/4 ports sit beside the fins on the broad face. The G1/2 ports face out from the end of the same tank. Match each fitting or plug to the thread at that position.
Key Specifications
| Model | CR-RD640RC-TK100 |
|---|---|
| Body thickness | 100 mm |
| Fins and core | Red copper |
| Coolant channels | 20 channels in five layers |
| Ports beside the fins | 2 × G1/4 |
| End-facing ports | 2 × G1/2 |
| Color | Black |
Which Version Do I Need?
Check the space available for the radiator, fans, and fittings before ordering.
What's in the Box
Installation & Use
To build the loop, have fans, a pump, tubing, fittings, stop plugs for any unused ports, and coolant.
FAQ
What does 100 mm measure?
It measures the thickness of the radiator body. Allow additional space for your fans, fittings, and tubing.
Which fittings match this radiator?
Use G1/4 fittings on the two ports beside the fins and G1/2 fittings on the two end-facing ports.
Should I flush the radiator before filling the loop?
Yes. Flush it before first use to clear any manufacturing residue that could discolor the coolant.
What affects how much heat the radiator can remove?
Bykski’s simulations vary fan airflow, coolant flow, and the difference between coolant inlet temperature and ambient air temperature. Heat rejection changes with those conditions.
- Purchase note: In order to better use and maintain the radiator, please clean the radiator before use, *Please note that it is normal to have a small amount of impurities in the radiator, which are some welding process residues left during manufacturing, etc. *If cleaning is not performed, the first pouring of coolant may cause some color contamination











