Bykski
Quick Connector and TPV Hose Kit for Servers, Bykski B-SW-FTN-10-X / B-SW-FTN-12-X
stars, based on ( 0 ) review
FormulaMod Official Store
Bykski · B-SW-FTN-10-X / B-SW-FTN-12-X
TPV hose and quick-tight fittings for server liquid cooling
Bykski’s B-SW-FTN-10-X and B-SW-FTN-12-X kits include flexible TPV hose and quick-tight compression fittings for server liquid cooling loops. The hose carries coolant between components with G1/4 female ports. A threaded collar holds the hose on the fitting barb. Choose the hose size by matching both its inner and outer diameters.
Fits
G1/4 female ports
Hose
Flexible TPV
Fittings
Brass compression
Use With
Match the port thread and both hose diameters.
- ✓G1/4 female ports on liquid cooling components
- ✓6 mm ID × 10 mm OD or 8 mm ID × 12 mm OD soft hose, depending on the fitting size
For the 10 mm OD / 2 m option, please contact us to confirm the supplied fitting size before ordering.
Key Specifications
| 10 mm OD option | B-SW-FTN-10-X 6 × 10 mm (ID × OD) |
|---|---|
| 12 mm OD option | B-SW-FTN-12-X 8 × 12 mm (ID × OD) |
| Hose material | TPV |
| Fitting type | Straight compression |
| Fitting material | Brass |
| Fitting thread | G1/4 male (component side) |
What's in the Box
TPV soft hoseQuick-tight compression fittings
Installation & Use
1
Thread the fittings into the G1/4 female ports.
2
Remove each compression collar and slide it onto the hose with its threads facing the fitting.
3
After confirming the fitting matches both the hose’s inner and outer diameters, seat the hose fully on the barb, then thread the collar back onto the fitting.
4
Leak-test the loop before powering the server.
FAQ
Do 10 mm and 12 mm refer to the hose’s outer diameter?
Yes. The 10 mm option has a 6 mm inner diameter, and the 12 mm option has an 8 mm inner diameter.
How does the quick-tight connector hold the hose?
The hose seats on a barb, and the compression collar threads onto the fitting to hold the hose in place.
Notes
- To ensure your water cooling system functions properly and enjoys after-sales warranty service, please avoid using the following types of coolant.
- Oily Coolant
- Alcohol and high-concentration ethylene glycol coolants
- Corrosive Coolant







