• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Bykski

PC Custom Loop Water Cooling Kit, Soft Tube, 240 or 360 mm | Bykski B-HSRBW-ED

stars, based on ( 1 ) reviews
items available
Contact Us
FormulaMod Official Store
Bykski · B-HSRBW-ED

Soft tube water cooling kit for a custom PC loop

The Bykski B-HSRBW-ED is a soft tube water cooling kit for building a custom loop around a CPU, a compatible graphics card, or both. Each program pairs its water blocks with a copper radiator, separate pump and reservoir, and clear soft tubing. Choose the program for the hardware you want to cool and the radiator mount your case supports.

Fits
CPU and GPU options
Radiator
240 or 360 mm
Tubing
10 mm ID × 13 mm OD
Lighting
5V 3-pin ARGB

Compatibility

Confirm your CPU socket, graphics card PCB, and radiator clearance before ordering.

For Programs A and E, choose Intel or AMD and confirm that the included CPU mounting hardware fits your exact socket before ordering. For Programs B and E, send us your exact graphics card model and PCB details so we can confirm a matching GPU block before you order.

Check your case for a 240 mm radiator mount for Program A or B, or a 360 mm mount for Program E. Allow room for the pump, reservoir, and tubing.

Design Highlights

Bykski B-HSRBW-ED clear cylindrical reservoir with black end caps and a black spiral

Separate pump and reservoir

The cylindrical reservoir feeds the pump through the included short male-to-male fitting. Leave room for both components when planning the tubing route.

Bykski B-HSRBW-ED Program A pair of radiator fans lit in multiple colors

Addressable lighting

The kit includes a lighting controller for the Bykski RBW system. For motherboard synchronization, use a 5V 3-pin ARGB header.

Key Specifications

Kit modelB-HSRBW-ED
Program ACPU loop · 240 mm radiator
Program BGPU loop · 240 mm radiator
Program ECPU and GPU loop · 360 mm radiator
Radiator materialCopper
Pump listed in kit chartCP-PA-X · 300 L/h flow · 3 m head
Reservoir190 mm · Black POM caps and black spiral
Soft tubingClear · 10 mm inner diameter × 13 mm outer diameter
Fans listed in kit chart120 mm ARGB · 1,500 RPM ±10%
Lighting sync5V 3-pin ARGB (Bykski RBW)

Which Version Do I Need?

Bykski B-HSRBW-EDTHIS PAGE
Choose this kit for a flexible soft tubing loop.
If you're building with rigid tubing, select a Hard Tube configuration on this kit page.

What's in the Box

1 × copper radiator1 × pump1 × spiral reservoir1 × lighting controller1 × short male-to-male fitting1 × pump cushion pad1 × 24-pin PSU jumper

Program A includes 1 CPU water block, 2 radiator fans, clear soft tubing, and 6 straight black soft tube fittings.

Program B includes 1 GPU water block, 2 radiator fans, 2 m of clear soft tubing, and 6 straight black soft tube fittings.

Program E includes 1 CPU water block, 1 GPU water block, radiator fans, 2 m of clear soft tubing, 8 straight black soft tube fittings, and 2 black 90° fittings. Confirm the included fan count before ordering Program E.

Programs B and E each include one matching GPU backplate and thermal pads. If the GPU block matched to your card is an acrylic-top full-cover gaming block, it includes 2 × G1/4 stop plugs. For a metal-top GPU block or if the top material is unconfirmed when you order, supply your own G1/4 plugs for any unused ports.

Installation & Use

1
Shut down and unplug the PC. Remove the stock cooler from the component you plan to water-cool. Clean the contact surface, apply your own thermal paste, and fit the block as directed in its mounting instructions.
2
Mount the radiator and fans in the case. Secure the reservoir and pump, then join them with the short male-to-male fitting.
3
Cut the soft tubing squarely to length. Connect the blocks, radiator, pump, and reservoir with the supplied fittings. Check that the seals are seated and the tubing runs are free of kinks.
4
Fill the reservoir with coolant before powering the pump. Run only the pump to circulate coolant, top up the reservoir as air clears, and check the joints and ports for leaks before powering the rest of the PC.

Supply your own coolant. If you need extra tubing, use Bykski 10 × 13 mm soft tubing.

FAQ

Which program should I choose for my custom PC loop?

Choose A for CPU cooling, B for GPU cooling, or E for both in one loop. A and B use a 240 mm radiator, and E uses a 360 mm radiator.

How do I make sure the GPU block fits my card?

Before ordering Program B or E, send us the exact model of your graphics card and its PCB details so we can confirm a matching block.

Does the kit come with coolant?

Buy coolant separately for any of the three programs.

Which motherboard header does the lighting use?

For motherboard sync, connect the included lighting controller to a 5V 3-pin ARGB header.

Notes
  • The program kit, which only include the products in the corresponding program kit list. The products such as case, RAM blocks, motherboard etc. outside the list, only for reference and display.
  • The kit's actual installation results will vary depending on progarm, case and builder ideas, etc.
  • As Bykski upgrades or adjusts the contents of the kit from time to time, such as product updates version, model or appearance, adjustments to the kit list, etc.,
  • After several times product upgrades by Bykski, the program list product will have a little different appearance from the products in the reference picture.
  • If not notified in time, the Bykski's latest real object and the newest list shall prevail
Recent Reviews ( 1 )
By
lxbfYeaa
Saturday, 04 September 2021
555
+