• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Bykski

RTX 4070 SUPER 360 mm AIO GPU Liquid Cooler | Bykski B-FRD-RTX4070S

stars, based on ( 0 ) review
items available
Contact Us
FormulaMod Official Store
Bykski · B-FRD-RTX4070S

360 mm AIO liquid cooler for GeForce RTX 4070 SUPER

The Bykski B-FRD-RTX4070S replaces the stock cooler on an NVIDIA GeForce RTX 4070 SUPER with the PCB layout shown below. The AIO combines a GPU water block, an inline pump, and a 360 mm radiator. Choose the single-GPU kit for one matching card or the dual-GPU kit for two.

Fits
RTX 4070 SUPER with matching PCB
Radiator
360 mm
Configurations
Single GPU or dual GPU
Cold plate
T2 copper

Compatibility

Bykski lists this graphics card for the PCB layout shown here.

  • ✓NVIDIA GeForce RTX 4070 SUPER

Before ordering, match your card’s PCB outline, component layout, and mounting holes to Bykski’s illustration. For the dual-GPU kit, check both cards.

Bykski B-FRD-RTX4070S manufacturer line drawing showing the supported graphics card PCB outline and mounting holes

Bykski’s PCB layout illustration.

Design Highlights

Bykski B-FRD-RTX4070S underside of the GPU water block showing the copper cold plate and its contact areas

Full-cover copper cold plate

The T2 copper cold plate cools the GPU core, memory, and power delivery components. Coolant runs through 0.3 mm jet microchannels in the cold plate.

Bykski B-FRD-RTX4070S-360 single-GPU kit showing one block assembly, a three-fan radiator, and the inline pump

Single-card loop

The single-card kit pairs one GPU block with a 360 mm radiator and an inline pump. Braided tubing connects the components.

Bykski B-FRD-RTX4070S-360-H dual-GPU kit showing two stacked block assemblies sharing one three-fan radiator

One radiator for two matching cards

The dual-GPU kit connects two GPU blocks to one shared 360 mm radiator.

Key Specifications

ModelBykski B-FRD-RTX4070S
Single-GPU SKUB-FRD-RTX4070S-360
Dual-GPU SKUB-FRD-RTX4070S-360-H
Radiator and clearanceBoth kits use one 360 mm radiator. Allow 63 mm for the radiator and fans together, plus room for the tubing. The radiator is 38 mm thick and the fans are 25 mm thick.
Cold plateT2 copper cold plate
Cooling coverageGPU core, memory, and power delivery components
Pump1 inline pump
Radiator fans3 × 120 mm radiator fans
ColorBlack

Which Version Do I Need?

Choose by how many matching cards you want to cool and whether you already have a custom loop.

360 mm single-GPU AIOTHIS PAGE
Select B-FRD-RTX4070S-360 for one card with the supported PCB.
360 mm dual-GPU AIOTHIS PAGE
Select B-FRD-RTX4070S-360-H for two cards with the supported PCB.
Compare this standalone block if you’re building a custom loop. Check its own PCB compatibility before ordering.

What's in the Box

1 × 360 mm radiator3 × radiator fans1 × inline pump with braided tubing1 × GPU block and backplate set (single-GPU kit) or 2 × sets (dual-GPU kit)Thermal padsMounting hardware

Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.

Installation & Use

1
Match the card’s PCB to Bykski’s illustration. Check the case’s 360 mm radiator mount and leave room for the fans and tubing.
2
Power off the PC and remove the graphics card. Remove its stock cooler and clean away the old thermal materials.
3
Place thermal pads on the memory and power delivery contact areas shown in the installation diagram. Apply your own thermal paste to the GPU core.
4
Align the block’s mounting posts with the PCB holes. Secure the block and backplate according to Bykski’s installation instructions. If the holes do not line up, stop and recheck the board.
5
Mount the radiator and fans, route the tubing, and connect the pump and fans according to the instructions for your kit.

You’ll need a matching graphics card, a case with room for the 360 mm assembly, and your own thermal paste.

Bykski B-FRD-RTX4070S PCB installation diagram showing pad locations around the GPU core and the paste placement on the GPU die

Bykski’s installation diagram. The dark strips mark the thermal pad positions. The applicator marks the GPU core.

FAQ

Which RTX 4070 card does this AIO fit?

Bykski lists the NVIDIA GeForce RTX 4070 SUPER with the PCB layout shown above. Match your card’s PCB to the drawing before ordering.

Can one kit cool two RTX 4070 SUPER cards?

Yes. The B-FRD-RTX4070S-360-H cools two cards with one shared 360 mm radiator. Each card must match the supported PCB layout.

What radiator mount does my case need?

Use a 360 mm radiator mount. Both kits use one 360 mm radiator. Allow 63 mm for the radiator and fans together, plus room for the tubing.

Which parts of the card does the block cool?

The full-cover block cools the GPU core, memory, and power delivery components.

Notes
  • For any questions, please contact customer service.

FormulaMod Official Store

Recent Reviews
+