Bykski
Sapphire METAL RX 9070 XT Water Block with Backplate, Bykski A-SP9070XTMT-X
Full-cover GPU water block for Sapphire METAL RX 9070 XT
The Bykski A-SP9070XTMT-X replaces the stock cooler on the Sapphire METAL Radeon RX 9070 XT 16GB and connects the card to a custom liquid cooling loop. Its copper cold plate removes heat from the GPU core, memory, and voltage regulators. The included aluminum backplate mounts behind the card’s circuit board.
Compatibility
Bykski lists one card layout for this block.
- ✓Sapphire METAL Radeon RX 9070 XT 16GB GDDR6 (11348-07-78)
Before ordering, confirm the model number on your card and match its PCB layout to Bykski’s compatibility diagram.
Sapphire METAL RX 9070 XT with its stock cooler.
Key Specifications
| Model | A-SP9070XTMT-X |
|---|---|
| Coverage | GPU core, memory, and VRM |
| Cold plate | Copper |
| Top | Clear acrylic (PMMA) |
| Backplate | Black aluminum |
| Dimensions (L × W × T) | 195.45 × 137.00 × 26.15 mm (Bykski drawing) |
| Port thread | G1/4 |
| Lighting | 5V 3-pin addressable RGB (RBW) |

Which Version Do I Need?
What's in the Box
Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.
Installation & Use
You also need a pump, radiator, G1/4 fittings, tubing, and coolant.
FAQ
Which RX 9070 XT does this water block fit?
Bykski lists the Sapphire METAL RX 9070 XT 16GB. Match the card number 11348-07-78 and compare your PCB with Bykski’s compatibility diagram before ordering.
Which motherboard header does the lighting use?
Connect the lighting to a 5V 3-pin ARGB header.
What fittings do I need?
Use G1/4 fittings sized for your tubing.
- Keep the lighting cable off 12V RGB headers. The block’s LEDs require 5V ARGB.







