Barrow
M.2 2280/22110 SSD Dual-Fan Heatsink | Barrow HDM2280-FT
stars, based on ( 0 ) review
FormulaMod Official Store
Barrow · HDM2280-FT
Dual-fan heatsink for M.2 SSDs
The Barrow HDM2280-FT is an aluminum alloy heatsink for 2280 and 22110 M.2 SSDs. Its base covers the SSD controller and storage chips, while two built-in fans push air through a straight channel to carry heat away during sustained reads and writes.
Fits
M.2 2280 / 22110
Cooling
Two built-in fans
Fan power
5V Barrow LRC 2.0
Compatibility
For single-sided and double-sided M.2 SSDs
- ✓M.2 2280 PCIe or SATA SSDs
- ✓M.2 22110 PCIe or SATA SSDs
Barrow also lists M.2 Optane memory. Check that your slot supports the drive’s length and interface, and measure the space around the slot before ordering.
Key Specifications
| Model | HDM2280-FT |
|---|---|
| Material | Aluminum alloy |
| Heatsink dimensions (L × W × H) | 72 × 23.9 × 16.7 mm |
| Fans | Two, over 10,000 RPM |
| Fan power | 5V Barrow LRC 2.0 |
| Colors | Black or silver |
Black and silver finishes
What's in the Box
1 × HDM2280-FT heatsink kit
Installation & Use
1
Peel off the thermal pad protective film. Use the blue pad on the back of an SSD with no rear chips, or the gray pad if the back has chips.
2
Slide the SSD into the heatsink tray, leaving the connector contacts and mounting notch exposed.
3
Place the blue silicone strip on the front of the drive, fit the fan cover, and tighten the four mounting screws.
4
Connect the fan lead to a compatible 5V Barrow LRC 2.0 power connection.
FAQ
Will it fit a SATA M.2 SSD?
Yes. Barrow lists 2280 and 22110 M.2 SSDs with either a PCIe or SATA interface.
What if my motherboard lacks a compatible 5V header?
Use a compatible Barrow lighting controller to power the fans. The controller is sold separately.
Notes
- In case of product appearance structure upgrade, without further notice, in kind prevail.










