Barrow
ASRock Radeon RX 9070 XT Taichi 16GB OC GPU Water Block, Barrow BS-AMD9070XT-PA
Full-cover water cooling for the RX 9070 XT Taichi
The Barrow BS-AMD9070XT-PA is a full-cover GPU water block for the ASRock Radeon RX 9070 XT Taichi 16GB OC. It replaces the stock air cooler so the GPU core, memory, and power delivery components can be cooled by a custom liquid loop. The block has G1/4 ports and comes with an aluminum backplate.
Compatibility
Barrow lists one supported graphics card.
- ✓ASRock Radeon RX 9070 XT Taichi 16GB OC (RX9070XT TC 16GO)
Before ordering, verify the exact card model, PCB layout, and mounting-hole pattern.
Design Highlights
Cooling across the GPU and power delivery area
The cold plate spans the GPU core, memory, and power delivery area, including the MOSFETs, chokes, and tantalum capacitors. Heat moves from those contact areas into the block and then into the coolant.
43 microchannels over the GPU
Barrow specifies 10 mm copper stock for the CNC-machined cold plate. The 5+3 groove pattern uses 0.5 mm grooves with 0.3 mm spacing to increase the surface area in contact with coolant.
Addressable lighting through clear acrylic
The clear acrylic top exposes the coolant path and the built-in LRC 2.0 lighting. For motherboard control, use the included adapter cable to connect to a 5V 3-pin ARGB header.
Key Specifications
| Model | BS-AMD9070XT-PA |
|---|---|
| Cold plate | Copper cold plate |
| Core design | Three-layer cooling structure |
| Top | Clear acrylic |
| Backplate | Passive aluminum alloy |
| Backplate finish | Black or white |
| Block dimensions | 209 × 123 × 24 mm |
| I/O bracket design | Dual slot |
| Port thread | G1/4 |
| Lighting | LRC 2.0 · 5V 3-pin ARGB via included adapter cable |
Which Version Do I Need?
Select the block by the exact graphics card model.
What's in the Box
Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.
Installation & Use
For a new loop, have a pump, reservoir, radiator, tubing, matching G1/4 tube fittings, and PC coolant ready.
FAQ
Is this an AIO cooler for the RX 9070 XT?
It is a GPU water block for a custom loop. Use it with a pump, reservoir, radiator, tubing, fittings, and coolant.
How do I tell if this fits my RX 9070 XT?
Look for ASRock model RX9070XT TC 16GO, sold as the Radeon RX 9070 XT Taichi 16GB OC. Verify your PCB against Barrow’s Taichi layout before ordering.
What fittings should I buy?
Use G1/4 tube fittings that match your tubing. The two included stop plugs close unused ports.
Does the backplate connect to the coolant loop?
The included aluminum backplate is passive. Connect the coolant lines to the water block terminal.
Which motherboard header controls the lighting?
Connect the lighting through the included adapter cable to a 5V 3-pin ARGB header. Keep it away from 12V 4-pin RGB headers.
- This is a repair or replacement-only item. Returns are not accepted in principle on compatibility issues or if the block has had water/fluid run through it.
- The manufacturer reserves the right to alter the block design to expand compatibility or upgrade/modify the product. The delivered item may not 100% match the pictured item.
- Not responsible for any damage caused by or when using this product. Please use it at your own risk.














