Barrow
PCIe Water Cooling Pass-Through Bracket, Dual G1/4 – Barrow GJTPC-01
Route a custom loop through a spare PCIe slot
The Barrow GJTPC-01 is a dual-channel water cooling pass-through that replaces the cover on one spare rear PCIe expansion slot. Two G1/4 female ports on each side connect your PC’s internal tubing to an external radiator, giving the outgoing and return lines a route through the same slot.
Fits / Use with
- ✓One spare rear PCIe expansion slot opening
- ✓G1/4 male tubing fittings
Before ordering, check the space around the slot on both sides of the case. Use the 30 mm port spacing to check clearance between adjacent fittings.
Design Highlights
POM body on a steel bracket
The carbon steel bracket mounts in the chassis slot and holds the black POM port body across the rear panel.
Threaded connections inside and out
Both ends of each pass-through channel accept a male G1/4 fitting. The bracket gives the outgoing and return tubing runs separate connections at the case wall.
Key Specifications
| Model | GJTPC-01 |
|---|---|
| Body material | POM (acetal) |
| Bracket material | Carbon steel |
| Color | Black |
| Pass-through channels | 2 |
| Threaded ports | 4 × G1/4 female, two per side |
| Port body (W × H × D) | 50 × 18 × 29.90 mm |
| Port spacing | 30 mm center to center |
Which Version Do I Need?
Choose by where you want the coolant lines to cross the case wall.
What's in the Box
Installation & Use
You’ll also need G1/4 male fittings and tubing sized to match them.
FAQ
What is a PCIe water cooling pass-through used for?
It routes the outgoing and return coolant lines to an external radiator through a slot opening that’s already in the case.
What fittings fit the G1/4 ports?
Use male G1/4 fittings sized for your tubing. Match the inner and outer diameters for soft-tube compression fittings, or the outer diameter for hard-tube fittings.
Does the port body come off the bracket for mounting?
Barrow’s installation drawing shows the port body separated at the bracket. A center screw holds it in place when assembled.
Are tubing fittings included?
Plan to supply your own G1/4 fittings. The box contains one pass-through bracket assembly.
- Note: In case of product appearance structure upgrade,without further notice,in kind prevail











