Barrow
Sapphire NITRO+ RX 9070 XT OC 16GB Water Block with Backplate, Barrow BS-SA9070XT-PA
Full-cover GPU water block for the Sapphire NITRO+ RX 9070 XT
The Barrow BS-SA9070XT-PA replaces the stock air cooler on the Sapphire NITRO+ Radeon RX 9070 XT OC 16GB with a full-cover block for a custom liquid cooling loop. Its copper cold plate transfers heat from the GPU core, memory, and power delivery components to the coolant. An aluminum backplate mounts behind the PCB.
Compatibility
Barrow confirms this graphics card PCB.
- ✓Sapphire NITRO+ AMD Radeon RX 9070 XT OC 16GB (11348-01-20G)
Before ordering, verify your exact card model and compare your PCB layout with the bare-board photo in the product gallery.
Design Highlights
Clear acrylic top and G1/4 ports
The clear acrylic top leaves the coolant path visible. The terminal uses G1/4 inlet and outlet threads so you can choose fittings sized for your tubing.
Copper cold plate
Barrow specifies a CNC-machined, nickel-plated copper cold plate for this model. The core area uses up to 43 jet microchannels.
Built-in addressable lighting
The lighting is 5V 3-pin ARGB. To sync it with a motherboard, use the separately sold Barrow ARGB adapter cable on a 5V 3-pin header.
Key Specifications
| Model | BS-SA9070XT-PA |
|---|---|
| Cold plate | Copper |
| Top | Clear acrylic |
| Backplate | Aluminum alloy |
| Backplate options | Black (BS-SA9070XT-PA-BK) or white (BS-SA9070XT-PA-WT) |
| Cooling coverage | GPU core, video memory, and power delivery components |
| Inlet and outlet thread | G1/4 |
| Water block (L × W × max. T) | 217 × 133.20 × 24 mm |
| Lighting | 5V 3-pin ARGB (RBW) |
Which Version Do I Need?
Check the Sapphire model name on your card before choosing a block.
What's in the Box
Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.
Installation & Use
For the loop, you also need a pump, reservoir, radiator and fans, tubing with matching G1/4 fittings, and coolant.
FAQ
Which Sapphire RX 9070 XT PCB does this block fit?
Barrow lists the NITRO+ RX 9070 XT OC 16GB PCB. Sapphire sells the PULSE as a separate model, so check the exact model name and PCB before ordering.
What are the water block dimensions?
Barrow’s drawing shows a length of 217 mm, a width of 133.20 mm including the port terminal, and a maximum thickness of 24 mm.
Does it come with a backplate?
Yes. The water block comes with one aluminum alloy backplate. Choose black or white when ordering.
Which fittings do I need?
Use G1/4 loop fittings sized for your tubing. Two G1/4 stop plugs are included. Buy the tubing fittings separately.
How do I connect the RGB lighting to my motherboard?
Use a separately sold Barrow ARGB adapter cable and connect it to a 5V 3-pin ARGB header. Do not connect it to a 12V 4-pin RGB header.
- 2. This is a repair or replacement-only item. Returns are not accepted in principle on compatibility issues or if the block has had water/fluid run through it.
- 3. The manufacturer reserves the right to alter the block design to expand compatibility or upgrade/modify the product. The delivered item may not 100% match the pictured item.
- 4. Not responsible for any damage caused by or when using this product. Please use it at your own risk.














