Barrow
Barrow Distro Plate PWM Water Pump, 17 W, SPB17-T V2
17 W PWM water pump for Barrow distro plates
The Barrow SPB17-T V2 is a 17 W water pump that circulates coolant in a custom PC liquid cooling loop. It bolts directly to a compatible Barrow distro plate with a dedicated pump mount. Run it in PWM mode or set the speed with its manual knob.
Compatibility
Barrow lists this pump for these distro plate models.
- ✓LLO11-SDB (original) · Lian Li O11
- ✓LLO11-SDB M · Lian Li O11 Mini
- ✓ANTECTE-SDB (original) · Antec Torque
- ✓TTP90-SDB · Thermaltake Core P90 TG
Match the exact plate model and revision before ordering. Check for the dedicated through-hole pump mount and seal groove.
Design Highlights
Through-hole mount
Four mounting screws pass through the acrylic top to secure the pump to the distro plate. A rubber seal sits in the plate’s groove at the joint.
PWM or manual speed control
PWM is the factory default. Turn the knob clockwise to switch to manual control, then turn it fully counterclockwise to return to PWM.
Key Specifications
| Model | SPB17-T V2 |
|---|---|
| Pump type | Permanent-magnet centrifugal |
| Materials | Acrylic top, aluminum alloy housing |
| Size (L × W × H) | 62.2 × 62.2 × 48.5 mm |
| Pump top thread | G1/4 |
| Rated voltage | 12 V DC |
| Rated current | 1.4 A |
| Rated power | 17 W |
| Speed signal | 4-pin PWM |
| Max. speed | 4,000 RPM |
| Max. flow | 960 L/h |
| Max. head | 5–6 m |
| Working temperature | Below 60 °C |
| Rated noise | Below 40 dB |
| Rated service life | Over 50,000 hours |
| Lighting | Barrow LRC 2.0, 5 V addressable lighting (motherboard adapter cable included) |
| Cover colors | Black, blue, red, silver |
Which Version Do I Need?
What's in the Box
The lighting controller is sold separately.
Installation & Use
You also need a compatible distro plate, radiator, tubing, fittings, and coolant.
FAQ
Will it fit any Barrow distro plate?
Check the exact model and revision against the fit list. The pump requires the matching through-hole mount and seal groove.
How do I control the pump speed?
Use the 4-pin PWM signal lead for automatic speed control, or turn the knob clockwise to switch to manual speed control.
Does it use a 5 V or 12 V lighting header?
Barrow specifies 5 V for LRC 2.0 lighting. Use the included adapter cable to connect to a 5 V 3-pin ARGB motherboard header. The pump motor has its own 12 V DC power connection.
What is the pump’s maximum flow rate?
Barrow rates it at a maximum of 960 L/h and lists a maximum head of 5–6 m.
Can I power the pump before filling the loop?
Fill the loop first and make sure coolant has reached the pump. Running it dry can damage it.
- In case product appearance upgrade, without further notice, prevail in kind.










