• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Barrow

12/14 mm OD 90° Dual-Ended Hard Tube Fitting – Barrow TWT90KNS-K12 / TWT90KNS-K14

stars, based on ( 1 ) reviews
9999items available
Contact Us
FormulaMod Official Store
Barrow · TWT90KNS-K12 / TWT90KNS-K14

90° elbow for joining two hard tubes

The Barrow TWT90KNS-K12 and TWT90KNS-K14 are dual-ended brass compression elbows for custom PC water cooling. They join two hard tubes of the same outside diameter, 12 mm for the K12 or 14 mm for the K14. The elbow makes the 90° turn so you can use straight tube ends at the corner.

Fits
12 mm or 14 mm OD hard tube
Angle
90°
Ends
Two tube sockets
Material
Brass

Fits

Match the outside diameter (OD) of both tubes.

  • ✓TWT90KNS-K12 fits 12 mm OD hard tube at both ends.
  • ✓TWT90KNS-K14 fits 14 mm OD hard tube at both ends.

Design Highlights

Barrow TWT90KNS-K14 black elbow with two hard-tube sockets at a right angle

A right angle between two tubes

Use the elbow at a corner in the middle of a hardline run. Each end takes a tube directly.

Barrow TWT90KNS-K14 silver elbow showing the diamond knurling on both collars

Diamond-knurled collars

The textured collars give your fingers a grip as you tighten each connection by hand.

Barrow TWT90KNS-K14 white elbow with both hard-tube sockets visible

Three finishes in either size

Choose black, silver, or white for either the 12 mm or 14 mm version.

Key Specifications

ModelsTWT90KNS-K12 and TWT90KNS-K14
Body materialBrass
Angle90°
ConnectionsTwo matching hard-tube compression sockets
K12 outside dimensions28.20 × 28.20 mm, Ø20 mm collar
K14 outside dimensions31.20 × 31.20 mm, Ø22 mm collar
FinishesBlack, silver, white
Barrow TWT90KNS-K12 and TWT90KNS-K14 manufacturer dimension drawings of the two 90-degree elbows

Barrow drawings in millimeters. K12 on the left, K14 on the right.

Which Version Do I Need?

Choose by what you need to connect at the corner.

Barrow TWT90KNS-K12 / TWT90KNS-K14THIS PAGE
Use this dual-ended elbow to join two hard tubes of the same outside diameter.
Use this swivel elbow to connect one 12 mm or 14 mm OD hard tube to a component’s female G1/4 port.

What's in the Box

1 × dual-ended 90° hard-tube compression fitting in the selected size and finish

Installation & Use

1
Position the elbow and measure both tube runs. Allow room for each tube end to seat inside its socket.
2
Cut both ends square and remove sharp edges with a deburring tool.
3
Seat one tube in each socket, then tighten both compression collars by hand.
4
Leak-test the loop and check both joints before powering the PC hardware.

Have two pieces of matching hard tube, a cutting tool, and a deburring tool ready.

FAQ

Can I join a 12 mm tube to a 14 mm tube with this elbow?

Each model takes the same outside diameter at both ends. Choose K12 for two 12 mm OD tubes or K14 for two 14 mm OD tubes.

Which Barrow 90° fitting connects directly to a G1/4 port?

Choose the Barrow TWT90KND-K12 or TWT90KND-K14 for a female G1/4 port. The TWT90KNS in this listing has a hard-tube socket at each end.

Do Ø20 mm and Ø22 mm in the drawings refer to tube size?

They are the outside diameters of the compression collars. The K12 fits 12 mm OD tubing and the K14 fits 14 mm OD tubing.

How many fittings come in the box?

Each box contains one elbow in the size and finish you select.

Recent Reviews ( 1 )
By
lxbfYeaa
Saturday, 04 September 2021
555
+