• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Barrow

ASUS ROG Astral RTX 5090 GPU Water Block with Backplate – Barrow BS-ASA5090-PA

stars, based on ( 0 ) review
$119.65 piece
items available
Contact Us
FormulaMod Official Store
Barrow · BS-ASA5090-PA

Full-cover water block for ASUS ROG Astral RTX 5090

The Barrow BS-ASA5090-PA is a full-cover GPU water block for select ASUS ROG Astral RTX 5090 and RTX 5090 D graphics cards. It replaces the card’s factory cooler and connects to a custom loop through G1/4 ports. The copper cold plate draws heat from the GPU core, memory, and power delivery components.

Fits
Select ROG Astral 5090 / 5090 D
Cold plate
Copper
Ports
G1/4
Lighting
5V 3-pin ARGB

Compatibility

Barrow’s compatibility table lists these ASUS ROG Astral cards.

  • ✓ASUS ROG-ASTRAL-RTX5090-O32G-GAMING
  • ✓ASUS ROG-ASTRAL-RTX5090D-O32G-GAMING
  • ✓ASUS ROG-ASTRAL-RTX5090D-32G-GAMING
  • ✓ASUS ROG-ASTRAL-LC-RTX5090D-O32G-GAMING
  • ✓ASUS ROG-ASTRAL-LC-RTX5090D-32G-GAMING

Before ordering, verify the full model on your card’s label and compare its PCB layout and mounting holes with Barrow’s compatibility information. Pay close attention to the LC, D, and O32G identifiers.

Barrow BS-ASA5090-PA compatibility reference showing the fan side of the ASUS ROG Astral GeForce RTX 5090 OC Edition with its original cooler

ASUS ROG Astral RTX 5090 OC Edition with its factory cooler. ASUS product image.

Design Highlights

Barrow BS-ASA5090-PA complete water block with a clear acrylic top over the copper cold plate

Full-cover copper cold plate

The copper cold plate cools the GPU core, memory, and power delivery components. The clear acrylic top lets you see the coolant path.

Barrow BS-ASA5090-PA close-up of the cold plate’s parallel jet microchannels

Jet microchannels at the GPU core

Barrow describes up to 43 jet microchannels in the block’s three-layer GPU core section.

Barrow BS-ASA5090-PA water block shown with its white aluminum backplate above the black version

Black or white aluminum backplate

Both options include a matching aluminum alloy backplate that screws onto the rear of the PCB. The clear acrylic top and Barrow LRC 2.0 lighting are the same on both versions.

Key Specifications

ModelBS-ASA5090-PA
Black backplate SKUBS-ASA5090-PA-BK
White backplate SKUBS-ASA5090-PA-WT
Cold plateCopper
TopClear acrylic
BackplateAluminum alloy
Cooling coverageGPU core, memory, and power delivery components
Microchannel grooves0.5 mm groove width, 0.3 mm spacing
Port threadG1/4 inlet and outlet
Block size (L × W × T)258.8 × 156.9 × 24.2 mm max.
LightingBarrow LRC 2.0, 5V 3-pin ARGB
Barrow BS-ASA5090-PA dimension drawing with top and side views, showing its width with the protruding port terminal

Barrow’s top and side views. Measurements are in millimeters. The side view shows 23.2 mm and 24.2 mm thickness at different points.

Which Version Do I Need?

Choose the water block by the exact model on your graphics card label.

Barrow BS-ASA5090-PATHIS PAGE
Choose this block for an ASUS ROG Astral card listed above.
If you have an ASUS TUF RTX 5090, check the PCB list for this TUF-specific block.
If you have a Palit RTX 5090 GameRock or GameRock OC, check this Palit-specific block.

What's in the Box

1 × full-cover GPU water block1 × aluminum alloy backplate2 × G1/4 stop plugs1 × mounting hardware set1 × thermal pad set

Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.

Installation & Use

1
Power off the PC, remove the graphics card, and take off its factory cooler.
2
Clean off the old thermal material. Fit thermal pads at the raised contact points that match your PCB, and apply your own thermal paste to the GPU core.
3
Align the block and backplate with the PCB mounting holes and fasten them with the supplied hardware.
4
Follow the block’s inlet and outlet layout when attaching your G1/4 fittings. Close the unused ports with the stop plugs.
5
Leak-test the loop before powering on the graphics card.

For the loop, you also need a pump, a reservoir, a radiator with fans, coolant, and tubing with matching G1/4 fittings.

Barrow BS-ASA5090-PA underside showing thermal pads on the cold plate around the open GPU core contact area

Barrow’s example shows the pad contact areas around the GPU core. Match pad placement to your PCB and the cold plate’s contact points.

FAQ

Which ASUS ROG Astral RTX 5090 cards fit?

Match the full ASUS model on your card’s label to the Compatibility list and verify the PCB layout before ordering.

Can I use the block on an Astral LC card?

Barrow lists the two Astral LC RTX 5090 D models in the Compatibility section for a custom-loop conversion.

Are the fittings for connecting tubing in the box?

The box includes two stop plugs for unused ports. Supply your own G1/4 fittings sized for your tubing.

How do I connect the block’s lighting to my motherboard?

Use a separately purchased ARGB adapter cable and a compatible 5V 3-pin ARGB header. Keep the cable off 12V 4-pin RGB headers.

Notes
  • Check your card model and PCB before installation. For return eligibility, see FormulaMod’s Returns & RMA policy.
  • The manufacturer reserves the right to alter the block design to expand compatibility or upgrade/modify the product. The delivered item may not 100% match the pictured item.
  • Not responsible for any damage caused by or when using this product. Please use it at your own risk.

FormulaMod Official Store

Recent Reviews
+