Barrow
RTX 3060 Ti / RTX 3070 Founders Edition GPU Water Block | Barrow BS-NVG3070-PA
Full-cover water block for RTX 3060 Ti and RTX 3070 Founders Edition
The Barrow BS-NVG3070-PA replaces the stock cooler on supported NVIDIA Founders Edition cards with a full-cover block for a custom liquid-cooling loop. Coolant carries heat away from the GPU core, memory, and power delivery components through the copper cold plate. The block uses G1/4 ports and includes an aluminum alloy backplate.
Compatibility
Barrow lists these NVIDIA Founders Edition cards.
- ✓NVIDIA GeForce RTX 3060 Ti Founders Edition
- ✓NVIDIA GeForce RTX 3070 Founders Edition
Before ordering, verify your exact card model and PCB layout, including mounting holes and component placement.
Design Highlights
Full-cover cooling
The cold plate sits over the GPU core, memory, and power delivery components. An aluminum alloy backplate mounts on the rear of the card.
43 jet microchannels
Barrow machines the fine channels into the copper cold plate above the GPU core to increase the surface area in contact with coolant.
Two ways to control the lighting
Use a compatible Barrow LRC 2.0 controller for standalone lighting control, or use a compatible sync cable to connect to a 5V 3-pin ARGB header on your motherboard.
Key Specifications
| Model | BS-NVG3070-PA |
|---|---|
| Block type | Full-cover GPU water block |
| Cold plate | Copper |
| Top | Clear acrylic |
| Backplate | Aluminum alloy |
| Dimensions (L × W × H) | 157.30 × 124.90 × 23.90 mm overall |
| Inlet and outlet thread | G1/4 |
| Lighting | Barrow LRC 2.0 5V ARGB |
| Motherboard lighting connection | 5V 3-pin ARGB via a compatible lighting sync cable |
Which Version Do I Need?
Match the full graphics card model and PCB layout before choosing a block.
What's in the Box
The lighting controller and lighting sync cable are separate add-on options.
Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.
Installation & Use
For the rest of the loop, use a pump, reservoir, radiator and fans, G1/4 fittings, matching tubing, and coolant.
FAQ
Is this a universal Barrow GPU water block?
Barrow designed it for the RTX 3060 Ti and RTX 3070 Founders Edition PCB layouts listed above. Verify the exact card model and PCB before you order.
How do I connect the lighting to my motherboard?
Use a compatible sync cable and a 5V 3-pin ARGB header. Keep the lighting lead off 12V 4-pin RGB headers.
Which fittings come with the block?
The base kit includes two G1/4 stop plugs. Supply your own G1/4 fittings to connect the block to your tubing.
Does the included backplate have its own water channel?
The aluminum alloy backplate mounts behind the PCB. Coolant flows through the main block only.
Can I use the block on its own?
The block needs a custom cooling loop with a pump, reservoir, radiator and fans, tubing, fittings, and coolant.
- This is a repair or replacement-only item. Returns are not accepted in principle on compatibility issues or if the block has had water/fluid run through it.
- The manufacturer reserves the right to alter the block design to expand compatibility or upgrade/modify the product. The delivered item may not 100% match the pictured item.
- Not responsible for any damage caused by or when using this product. Please use it at your own risk.
- All products are covered by our return policy.












