Barrow ASSGR701-SDB Acrylic Waterway Distribution Board for ASUS ROG Hyperion GR701 Chassis, G1/4 Ports, 5V LRC 2.0 ARGB

Barrow ASSGR701-SDB Acrylic Waterway Distribution Board for ASUS ROG Hyperion GR701 Chassis, G1/4 Ports, 5V LRC 2.0 ARGB

TL;DR: This Barrow distribution board is purpose-cut to mount inside the dedicated waterway pocket of the ASUS ROG Hyperion GR701 chassis. Coolant channels are CNC-routed into a multi-layer acrylic sandwich and the board exposes G1/4 ports for the loop's pump, radiators, CPU block and GPU block, replacing...

Common Applications

This Barrow distribution board is purpose-cut to mount inside the dedicated waterway pocket of the ASUS ROG Hyperion GR701 chassis. Coolant channels are CNC-routed into a multi-layer acrylic sandwich and the board exposes G1/4 ports for the loop's pump, radiators, CPU block and GPU block, replacing the equivalent run of hardline tubing with a single flat plate. Lighting is Barrow LRC 2.0 addressable RGB on a 5V 3-pin connector that drops into any motherboard A-RGB header or A-RGB controller; mixing this connector with a 12V RGB header will destroy the LEDs. The board fits the GR701 only and does not adapt to other ATX or E-ATX chassis.

Frequently Asked Questions

Q: Which case is this distro board designed for?

A: The ASUS ROG Hyperion GR701 chassis only. The mounting hole pattern and external footprint are specific to that case.

Q: What thread are the ports?

A: Standard G1/4 BSPP.

Q: What RGB standard does it use?

A: Barrow LRC 2.0, 5V 3-pin addressable RGB. Do not connect to a 12V RGB header.

Q: Is a pump included?

A: No. The board is designed to mate with a separately purchased DDC or D5 pump and pump top.

Q: Will it fit other ASUS or large ATX cases?

A: No. It is cut specifically for the GR701 waterway pocket and is not cross-compatible.