• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Granzon

ZOTAC RTX 4090 Water Block for AMP Extreme AIRO / Trinity | Granzon GBN-ST4090TQ Full Armor

stars, based on ( 0 ) review
$288.33 piece
items available
Contact Us
FormulaMod Official Store
Granzon · GBN-ST4090TQ

Full Armor water block for select ZOTAC RTX 4090 cards

The Granzon GBN-ST4090TQ is a full-cover GPU water block for select ZOTAC GeForce RTX 4090 cards, including the AMP Extreme AIRO (ZT-D40900B-10P). It replaces the stock air cooler and connects to a custom loop through side-mounted G1/4 ports. The nickel-plated copper cold plate cools the GPU core, memory, and voltage regulators.

Fits
Select ZOTAC RTX 4090 PCBs
Cold plate
Nickel-plated copper
Ports
Side-mounted G1/4
Backplate
Passive aluminum

Compatibility

Fit is based on the ZOTAC board layouts listed below.

  • ✓ZOTAC GAMING GeForce RTX 4090 AMP Extreme AIRO (ZT-D40900B-10P)
  • ✓ZOTAC GAMING GeForce RTX 4090 Trinity OC (ZT-D40900J-10P)
  • ✓ZOTAC GAMING GeForce RTX 4090 Trinity (ZT-D40900D-10P)
  • ✓ZOTAC GAMING GeForce RTX 4090 Apocalypse

Before ordering, confirm your exact card model and verify its PCB layout.

Granzon GBN-ST4090TQ compatibility reference showing the bare PCB of the ZOTAC RTX 4090 AMP Extreme AIRO

ZOTAC RTX 4090 AMP Extreme AIRO PCB. Photo by TechPowerUp.

Design Highlights

Granzon GBN-ST4090TQ cold plate illustration showing the raised component contact areas

Full-cover cold plate

The copper plate has raised contact areas for the GPU core, memory, and power delivery components.

Granzon GBN-ST4090TQ close-up illustration of the microchannels machined into the cold plate

0.3 mm microchannels

Coolant passes through the fine channels machined into the cold plate over the GPU.

Granzon GBN-ST4090TQ exploded view of the block, vented armor panels, and I/O bracket

Wraparound aluminum armor

The aluminum armor wraps around the board. The slotted backplate sits outside the coolant path, and a one-piece I/O bracket secures the assembly at the slot.

Key Specifications

Model (SKU)GBN-ST4090TQ
Cold plateNickel-plated copper
Armor and backplateAluminum alloy
Backplate typePassive
Block dimensions (L × W × T)258.32 × 124.52 × 30.52 mm
Copper plate (L × W)222.5 × 118.7 mm
Microchannel width0.3 mm
I/O bracket thickness12 mm (aluminum alloy)
Port threadG1/4, side-mounted inlet and outlet
Granzon GBN-ST4090TQ dimension drawing showing the block face and I/O bracket side

Manufacturer drawing. Dimensions are in millimeters.

Which Version Do I Need?

Use the full card name and PCB layout to choose among these Granzon Full Armor blocks.

Granzon GBN-ST4090TQTHIS PAGE
Choose this model for one of the ZOTAC RTX 4090 boards listed above.
Choose this model for a ZOTAC RTX 4080 AMP Extreme AIRO or RTX 4070 Ti 12GB AMP Extreme AIRO with a matching PCB.
Choose this model for the NVIDIA GeForce RTX 4090 Founders Edition PCB.

What's in the Box

1 × full-cover GPU water block1 × passive backplate1 × mounting hardware setThermal pads

Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.

Installation & Use

1
Shut down the system and remove the graphics card. Remove the stock cooler and backplate, then clean away old paste and pad residue.
2
Place thermal pads at the contact points for your exact PCB. Apply a thin layer of your own thermal paste to the GPU die.
3
Align the water block, PCB, and backplate. Tighten the mounting screws gradually and evenly.
4
Connect the side inlet and outlet with G1/4 fittings. Supply your own G1/4 plugs for any unused ports.
5
Fill and leak-test the loop with only the pump powered. Check the fittings and plugs before powering the card.

For the custom loop, supply a pump, reservoir, radiator, coolant, tubing, and G1/4 fittings sized for your tubing. The optional Bykski vertical GPU mount is sold separately.

Granzon GBN-ST4090TQ installation illustration showing the block, PCB, thermal pads, screws, and backplate

Manufacturer’s assembly illustration. Use the contact points for your exact PCB.

FAQ

Does this water block fit the ZOTAC RTX 4090 AMP Extreme AIRO?

Yes, for the ZT-D40900B-10P layout. Confirm your card's part number and PCB before ordering.

What materials are used in the block?

The cold plate is nickel-plated copper. The outer armor and backplate are aluminum alloy.

Does the backplate need a separate coolant connection?

The included backplate is passive and sits outside the coolant path.

Which fittings do I need?

Use G1/4 fittings for the side inlet and outlet, with the tubing connection sized for your tubing.

Notes
  • Bykski reserves the right to upgrade/adjust the product, in case of upgrading to the appearance and structure, no further notice, the real object shall prevail.

FormulaMod Official Store

Recent Reviews
+