• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Granzon

ASUS ROG Hyperion GR701 Distro Plate - Granzon GC-AS-GR701, 5V ARGB, Optional DDC Pump

stars, based on ( 0 ) review
€212.66 piece
items available
Contact Us
FormulaMod Official Store
Granzon · GC-AS-GR701

Distro plate for the ROG Hyperion GR701

The Granzon GC-AS-GR701 is an acrylic distribution plate for the ASUS ROG Hyperion GR701 case. Its internal channels bring the tubing from the radiator, CPU block, and one GPU block to a single panel. Both versions have 5V addressable RGB lighting. Choose a preinstalled GFM III digital-display DDC pump or the no-pump version.

Fits
ROG Hyperion GR701
Fitting thread
G1/4
Lighting
5V 3-pin ARGB

Compatibility

  • ✓ASUS ROG Hyperion GR701

Check the model on your case before ordering. Plan the tube runs around your own motherboard, blocks, and fittings.

Granzon GC-AS-GR701 exploded view showing screws passing through the case frame into the plate

A · M4 × 6 mm screws
B · Case frame
C · Distro plate

Design Highlights

Granzon GC-AS-GR701 no-pump front view showing the clear waterway, black armor, and port rings

Acrylic waterway with aluminum armor

The clear PMMA body shows the double-layer coolant channels. Aluminum alloy armor covers the outer edge, and brass reinforcements support the inlet and outlet ports.

Granzon GC-AS-GR701 lit in blue and pink with the digital-display pump mounted

Lighting shown on the version with the GFM III pump.

Digital pump display and addressable lighting

The pump option puts the GFM III display on the plate. Both options have a 5V addressable RGB strip that illuminates the acrylic channels.

Granzon GC-AS-GR701 front-view diagram with numbered ports and adjustment-module screw holes

1 to radiator · 2 from radiator · 3 air vent
4 from CPU block · 5 to CPU block
6 from GPU block · 7 to GPU block
8 adjustment-module screw holes · 9 drain

Use the port map to plan your tubing

The radiator, CPU block, and GPU block each have a dedicated pair of ports. The map shows which connection goes to the component and which brings coolant back. The plate also has dedicated air and drain ports.

Key Specifications

ModelGranzon GC-AS-GR701
Plate bodyPMMA acrylic
Outer armorAluminum alloy
Plate only (H × W × D)398 × 128 × 30 mm
Fitting threadG1/4
Lighting5V 3-pin addressable RGB (RBW)
Pump on equipped versionGranzon GFM III digital-display PWM DDC
GFM III connections4-pin Molex power and 4-pin motherboard PWM
Granzon GC-AS-GR701 bare plate dimension drawing with front and angled views

Plate dimensions in millimeters.

Which Version Do I Need?

GC-AS-GR701 distro plateTHIS PAGE
Choose With intelligent pump for a preinstalled GFM III, or No pump if you are supplying a compatible pump. With either option, you choose the rest of the loop components.
Choose the kit if you also need the CPU and GPU blocks, radiators, and tubing for a single-GPU loop.

What's in the Box

1 × GC-AS-GR701 distro plateMounting hardware5V ARGB LED strip

With intelligent pump adds 1 preinstalled GFM III DDC pump.

Installation & Use

1
Attach the plate to the GR701 case frame with M4 × 6 mm screws using the mounting diagram above.
2
Route the radiator, CPU block, and GPU block tubing using the port map. Match the fittings on the tubing side to your tubing size.
3
For the GFM III, connect the 4-pin Molex lead to the power supply and the 4-pin PWM lead to the motherboard. Connect the lighting to a 5V 3-pin ARGB header.
4
Fill and bleed the loop. Keep coolant at the pump inlet and leak-test with only the pump powered before starting the PC.

You also need radiators and fans, water blocks matched to your hardware, G1/4 fittings, matching tubing, and PC coolant. The no-pump version needs a compatible pump.

Granzon GC-AS-GR701 single-GPU routing illustration with a CPU block, a GPU block, and radiators

Example tubing layout with one GPU block.

FAQ

Which case does this distro plate fit?

It is designed for the ASUS ROG Hyperion GR701. Check the full model name on your case before ordering.

Does this plate come with a pump?

With intelligent pump comes with a preinstalled GFM III digital-display DDC pump. Select No pump if you are supplying your own compatible pump.

Which fittings do I need?

Use G1/4 fittings at the plate. Match the tubing side of the fitting to your tubing dimensions.

Which header does the lighting use?

Use a 5V 3-pin ARGB header. A 12V RGB header can damage the strip.

Do I still need water blocks and radiators?

Yes. This listing supplies the distro plate and the parts listed in the box section. Get water blocks for your hardware, radiators and fans, G1/4 fittings, matching tubing, and coolant separately.

Notes
  • This block is designed specifically for this case. Depending on the motherboard, blocks, fittings used, and layout, the connecting tubing may not appear as pictured (perfectly horizontal). Not responsible for any hardware damage. Use at your own risk.
  • As Bykski upgrades or adjusts the contents of the kit from time to time, such as product updates version, model or appearance, adjustments to the layout, etc..
    If not notified in time, the Bykski's latest real object shall prevail.

FormulaMod Official Store

Recent Reviews
+