• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

FormulaMod

Motherboard RGB Backplate for ATX, Micro-ATX & Mini-ITX - FormulaMod Fm-MBRGB, 5V 3-Pin ARGB

stars, based on ( 0 ) review
€17.28 piece
Quantity Price
1+ €17.28
2+ €16.76
3+ €16.42
items available
Contact Us
FormulaMod Official Store
FormulaMod · Fm-MBRGB

ARGB lighting around your motherboard

The FormulaMod Fm-MBRGB is an addressable RGB lighting backplate that sits between the motherboard and the case tray, casting a glow around the board. Choose the frame that matches your motherboard form factor, then power the lighting from a 5V 3-pin ARGB header. A frosted acrylic shell softens the light along the edges.

Fits
ATX / Micro-ATX / Mini-ITX
Connector
5V 3-pin ARGB
Frame thickness
5 mm

Compatibility

Fits motherboards without armor. Choose the size that matches your board.

  • ✓ATX → Fm-MBRGB_ATX
  • ✓Micro-ATX (M-ATX) → Fm-MBRGB_MATX
  • ✓Mini-ITX (ITX) → Fm-MBRGB_ITX

Not compatible:

  • ✗Motherboards with armor
  • ✗12V 4-pin RGB headers

Before ordering, check that the frame lines up with your motherboard mounting points and that there is room for the 5 mm frame between the board and the case tray.

FormulaMod Fm-MBRGB connector guide comparing the 5V 3-pin header on the left and 12V 4-pin header on the right

Manufacturer connector guide. Use the 5V 3-pin ARGB header shown on the left.

Design Highlights

FormulaMod Fm-MBRGB installed behind a motherboard and casting a multicolor glow around its edges

Backlight around the motherboard

The frosted acrylic shell spreads the LED light around the board for a softer outline. FormulaMod shows both single-color and multicolor effects.

FormulaMod Fm-MBRGB ATX backplate shown from both sides with its attached lighting lead

Open frame with an attached lead

The backplate forms a frame around the board’s edge. Its attached lead runs to the motherboard’s 5V ARGB header.

Key Specifications

ModelFm-MBRGB
ShellFrosted acrylic
Lighting connector5V 3-pin addressable RGB (ARGB)
ATX dimensions234 × 290 × 5 mm
Micro-ATX dimensions234 × 238 × 5 mm
Mini-ITX dimensions163 × 167 × 5 mm
FormulaMod Fm-MBRGB frame drawings for ATX at upper left, Micro-ATX below, and Mini-ITX at right

Manufacturer drawing. ATX at upper left, Micro-ATX below, Mini-ITX at right. Measurements are width × length × thickness.

What's in the Box

Fm-MBRGB lighting backplate in your selected size with attached ARGB lead

Installation & Use

1
Switch off and unplug the PC. If the motherboard is already installed, remove it to expose the case tray.
2
Align the frame so the motherboard standoffs protrude through it. Secure the frame flat against the case tray with the translucent white side facing the motherboard.
3
Set the motherboard over the frame and fasten it to the standoffs.
4
Connect the lighting lead to the motherboard’s 5V 3-pin ARGB header. Align the 5V positions before powering the PC back on.

You’ll need a motherboard with the matching 5V 3-pin ARGB header and a case with room behind the board.

FormulaMod Fm-MBRGB translucent frame lying flat on the case motherboard tray before the board is installed

Manufacturer installation photo showing the frame in position before the motherboard goes in.

FAQ

Which backplate size fits my motherboard?

Match the option to your board’s form factor. Select ATX for ATX, M-ATX for Micro-ATX, or ITX for Mini-ITX.

Can I use this backplate if my motherboard has armor?

Only motherboards without armor are supported. Check the mounting points and space behind your board before ordering.

Can I plug it into a 12V RGB header?

Use a 5V 3-pin ARGB header. Connecting it to a 12V 4-pin RGB header can damage the LEDs.

Does the frame go in front of or behind the motherboard?

Place it against the case tray behind the motherboard, with the translucent white side facing the board.

Product Gallery

FormulaMod Fm-MBRGB illuminated ATX frame propped against its illustrated carton
FormulaMod Fm-MBRGB illuminated ATX frame around a printed backing
FormulaMod Fm-MBRGB corner and 5V 3-pin ARGB plug against a white background

5V 3-pin ARGB plug

FormulaMod Fm-MBRGB empty backlight frame casting a rainbow glow on a dark surface
FormulaMod Fm-MBRGB installed behind a motherboard in an open chassis
FormulaMod Fm-MBRGB ATX rectangular frame with mounting cutouts and a coiled cable

ATX

FormulaMod Fm-MBRGB Mini-ITX frame with a square opening and a coiled ARGB lead

Mini-ITX (ITX)

FormulaMod Fm-MBRGB Micro-ATX frame with side mounting cutouts and its cable

Micro-ATX (M-ATX)

Notes
  • The motherboard and case in the pictures are for reference and display purposes only.
  • Due to product upgrades, the new appearance of the product may be slightly different from the video and some product picture.
  • In case of upgrading to the appearance and structure, no further notice, the real object shall prevail

FormulaMod Official Store

Recent Reviews
+