• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Bykski

RAM Water Block for up to 4 DIMMs, Bykski B-RAM-X-V4 with 5V ARGB

stars, based on ( 0 ) review
items available
Contact Us
FormulaMod Official Store
Bykski · B-RAM-X-V4

RAM water block for up to four DIMMs

The Bykski B-RAM-X-V4 is a RAM water block for custom PC liquid-cooling loops. It mounts over up to four DIMMs fitted with compatible Bykski heat spreaders and transfers heat from the spreaders into the coolant through a copper cold plate. The block is available in black or silver with 5V addressable RGB lighting.

Fits
Bykski memory heat spreaders
Port thread
G1/4
Lighting
5V 3-pin ARGB

Compatibility

Each DIMM needs a matching Bykski heat spreader.

  • ✓DDR5 DIMMs with Bykski B-MRCOV-X-V2 heat spreaders
  • ✓DDR4 DIMMs with Bykski B-MRCOV-X heat spreaders
  • ✓G1/4 fittings in a loop with no aluminum in the coolant path

Not compatible:

  • ✗12V 4-pin RGB headers

Before ordering, check the spreader model, DIMM slot layout, and clearance above the memory for fittings and tubing.

Design Highlights

Bykski B-RAM-X-V4 underside showing the cold plate and two mounting slots

Copper cold plate

The plated T2 copper cold plate sits against the heat spreaders. Coolant flowing through the block carries heat away from the memory.

Bykski B-RAM-X-V4 black RAM water block lit in blue and pink

5V addressable lighting

The ARGB lighting illuminates the clear acrylic. Use a compatible 5V controller or a matching adapter for a 5V 3-pin motherboard header.

Bykski B-RAM-X-V4 silver RAM water block with two top ports and a clear acrylic window

Black or silver trim

Both finishes use an acrylic top with an aluminum alloy trim plate. The two G1/4 ports face up for tubing connections.

Key Specifications

ModelB-RAM-X-V4
CapacityUp to 4 DIMMs with compatible heat spreaders
Cold platePlated T2 copper
Top and trimAcrylic top and aluminum alloy trim
Dimensions (L × W × H)133 × 48 × 20 mm
Ports2 × G1/4
Port center spacing74 mm
Mounting slot center spacing110.20 mm
Lighting5V 3-pin ARGB (Bykski RBW)
FinishBlack or silver
Bykski B-RAM-X-V4 dimension drawing with top and side views

Manufacturer drawing. Dimensions are in millimeters.

Which Version Do I Need?

Bykski B-RAM-X-V4THIS PAGE
Choose this water block if you have or plan to buy matching heat spreaders. Select black or silver.
Add this separate heat spreader for each DDR5 DIMM you want to cool with the B-RAM-X-V4.
Choose this model if you want a water block and heat spreader assembly in one unit.

What's in the Box

1 × RAM water block with 5V ARGB lightingMounting screws

Memory heat spreaders and the lighting controller are sold separately.

Installation & Use

1
Power off and unplug the PC. Fit the thermal pads and Bykski heat spreader to each DIMM as directed by the spreader instructions.
2
Seat the DIMMs in the slots specified by your motherboard manual. Align the block with the spreaders and secure it with the mounting screws.
3
Connect the water block to the loop with G1/4 fittings that match your tubing.
4
Fill and leak-test the loop with only the pump powered. Check the fittings for leaks before powering the computer.
5
With the PC off, connect the lighting to a compatible 5V ARGB controller or use a matching adapter to connect it to a 5V 3-pin motherboard header.

You also need matching heat spreaders, G1/4 fittings, tubing, and a custom loop with a pump, radiator, and coolant.

Bykski B-RAM-X-V4 exploded drawing showing the screws, block, four memory heat spreaders, and an illustrative motherboard

Manufacturer drawing. From top to bottom: mounting screws, water block, heat spreaders, and an example motherboard.

FAQ

Can I use this water block with DDR5 RAM?

Yes. Use one Bykski B-MRCOV-X-V2 heat spreader per DDR5 DIMM. The spreaders are sold separately.

How many RAM sticks can one block cool?

One block can cool up to four DIMMs fitted with compatible Bykski heat spreaders. Check your motherboard's DIMM slot layout before ordering.

What fittings does the block use?

Both ports take G1/4 fittings. Choose fittings that match your tubing.

Can I use a 12V RGB header for the lighting?

Use a compatible 5V 3-pin ARGB connection. A 12V 4-pin RGB header can damage the lighting.

Notes
  • Not responsible for any hardware damage. Use at your own risk.

FormulaMod Official Store

Recent Reviews
+