Bykski
RAM Water Block for up to 4 DIMMs, Bykski B-RAM-X-V4 with 5V ARGB
RAM water block for up to four DIMMs
The Bykski B-RAM-X-V4 is a RAM water block for custom PC liquid-cooling loops. It mounts over up to four DIMMs fitted with compatible Bykski heat spreaders and transfers heat from the spreaders into the coolant through a copper cold plate. The block is available in black or silver with 5V addressable RGB lighting.
Compatibility
Each DIMM needs a matching Bykski heat spreader.
- ✓DDR5 DIMMs with Bykski B-MRCOV-X-V2 heat spreaders
- ✓DDR4 DIMMs with Bykski B-MRCOV-X heat spreaders
- ✓G1/4 fittings in a loop with no aluminum in the coolant path
Not compatible:
- ✗12V 4-pin RGB headers
Before ordering, check the spreader model, DIMM slot layout, and clearance above the memory for fittings and tubing.
Design Highlights
Copper cold plate
The plated T2 copper cold plate sits against the heat spreaders. Coolant flowing through the block carries heat away from the memory.
5V addressable lighting
The ARGB lighting illuminates the clear acrylic. Use a compatible 5V controller or a matching adapter for a 5V 3-pin motherboard header.
Black or silver trim
Both finishes use an acrylic top with an aluminum alloy trim plate. The two G1/4 ports face up for tubing connections.
Key Specifications
| Model | B-RAM-X-V4 |
|---|---|
| Capacity | Up to 4 DIMMs with compatible heat spreaders |
| Cold plate | Plated T2 copper |
| Top and trim | Acrylic top and aluminum alloy trim |
| Dimensions (L × W × H) | 133 × 48 × 20 mm |
| Ports | 2 × G1/4 |
| Port center spacing | 74 mm |
| Mounting slot center spacing | 110.20 mm |
| Lighting | 5V 3-pin ARGB (Bykski RBW) |
| Finish | Black or silver |
Which Version Do I Need?
What's in the Box
Memory heat spreaders and the lighting controller are sold separately.
Installation & Use
You also need matching heat spreaders, G1/4 fittings, tubing, and a custom loop with a pump, radiator, and coolant.
FAQ
Can I use this water block with DDR5 RAM?
Yes. Use one Bykski B-MRCOV-X-V2 heat spreader per DDR5 DIMM. The spreaders are sold separately.
How many RAM sticks can one block cool?
One block can cool up to four DIMMs fitted with compatible Bykski heat spreaders. Check your motherboard's DIMM slot layout before ordering.
What fittings does the block use?
Both ports take G1/4 fittings. Choose fittings that match your tubing.
Can I use a 12V RGB header for the lighting?
Use a compatible 5V 3-pin ARGB connection. A 12V 4-pin RGB header can damage the lighting.
- Not responsible for any hardware damage. Use at your own risk.












