Bykski
NVIDIA A100 40GB PCIe Water Block with Backplate – Bykski N-TESLA-A100-40G-SR
A100 40GB PCIe water block for a custom loop
The Bykski N-TESLA-A100-40G-SR is a full-cover GPU water block with a backplate for the NVIDIA A100 40GB PCIe. It replaces the card’s passive heatsink and transfers heat from the GPU, memory, and power stages to a radiator in your custom liquid-cooling loop.
Compatibility
Supported PCIe board layouts
- ✓NVIDIA A100 40GB PCIe
- ✓NVIDIA CMP 170HX 8GB PCIe
- ✓NVIDIA A30 24GB PCIe
Match the mounting holes, components, and power connector on your exact PCB before ordering.
Design Highlights
Cool the GPU, memory, and power stages
The copper cold plate collects heat from the GPU, its memory, and the board’s power stages. Coolant enters through the marked inlet and carries that heat to the radiator.
Backplate fits behind the board
The separate backplate attaches to the rear of the PCB after the cold plate is in place.
Key Specifications
| Model | N-TESLA-A100-40G-SR |
|---|---|
| Cooler type | Full-cover GPU water block for a custom loop |
| Cold plate | Copper |
| Cooling coverage | GPU, memory, and power stages |
| Backplate | Included |
| Flow direction | Follow the IN and OUT markings on the block |
Which Version Do I Need?
Start with your card’s PCB, then choose a stand-alone block or an all-in-one kit.
What's in the Box
Thermal paste is not included (it cannot be shipped by air). Please use your own GPU thermal paste during installation.
Installation & Use
You also need a pump, reservoir, radiator and fans, tubing, compatible fittings, and coolant. Confirm the required pad thickness for your block revision and PCB before mounting.
FAQ
Does it fit the A100 80GB or A100 SXM?
The 40G-SR is specified for the A100 40GB PCIe. The SXM module uses a different form factor, and Bykski lists a separate 80GB block.
Which CMP 170HX fits?
The published compatibility list specifies the 8GB PCIe card. Compare your PCB and mounting holes before ordering.
Will this fit a Tesla V100?
The 40G-SR fit list is limited to the three boards above. Choose a block for your exact Tesla V100 PCB.
Is this the Bykski N-TESLA-A100-X-V2?
This page is for the N-TESLA-A100-40G-SR. The earlier X-V2 has its own PCB fit guide. Match your card to the guide for the exact block model before ordering.
Do I need a separate pump?
Use your existing loop pump or add one when building a new loop. The pump circulates coolant through the block and radiator.
What should I check for case clearance?
Check the space around the card for the fitted block, its fittings, and the tubing bends. Check your case’s radiator mount for room for the radiator and its fans.
- This is a repair or replacement-only item. Returns are not accepted on compatibility issues or if the block has had water/fluid run through it.
- See the installation diagram above.
- The manufacturer reserves the right to alter the block design to expand compatibility. The delivered item may not 100% match the pictured item.
- This product is designed for self-installation. The manufacturer is not liable for any damages resulting from misuse, including, but not limited to, improper installation or the use of incompatible hardware or fluids. By using this product, you accept all related risks.











