• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Bykski

ZOTAC RTX 4080 SUPER Trinity Water Block with Backplate | Bykski N-ST4080SRTNOC-X

stars, based on ( 0 ) review
€133.25 piece
items available
Contact Us
FormulaMod Official Store
Bykski · N-ST4080SRTNOC-X

Full-cover water block for ZOTAC RTX 4080 SUPER Trinity

The Bykski N-ST4080SRTNOC-X replaces the stock cooler on supported ZOTAC GeForce RTX 4080 SUPER Trinity cards, including the Trinity OC White Edition 16GB. It cools the GPU, graphics memory, and voltage regulators in a custom liquid cooling loop. The block connects through G1/4 ports, and the included aluminum backplate mounts behind the PCB.

Fits
Select ZOTAC RTX 4080 SUPER Trinity cards
Cold plate
Nickel-plated copper
Ports
G1/4
Lighting
5V 3-pin ARGB

Compatibility

Match your ZOTAC card to one of these listings.

  • ✓ZOTAC GAMING GeForce RTX 4080 SUPER Trinity OC White Edition 16GB (ZT-D40820Q-10P)
  • ✓ZOTAC GAMING GeForce RTX 4080 SUPER Trinity Black Edition 16GB (ZT-D40820D-10P)

Before ordering, check the part number on your card and confirm its exact PCB layout.

Bykski N-ST4080SRTNOC-X compatibility photo showing the bare ZOTAC RTX 4080 SUPER Trinity OC White Edition PCB from above

Bykski’s PCB photo for the ZOTAC RTX 4080 SUPER Trinity OC White Edition.

Design Highlights

Bykski N-ST4080SRTNOC-X angled view of the clear acrylic top, coolant channels, and port terminal

Full-cover cold plate

The nickel-plated T2 copper plate picks up heat from the GPU die, graphics memory, and voltage regulators.

Bykski N-ST4080SRTNOC-X manufacturer detail showing the fins of the central jet microchannels

0.3 mm jet microchannels

Coolant passes through a bank of fine channels in the cold plate above the GPU die.

Bykski N-ST4080SRTNOC-X black backplate with mounting holes and diagonal grooves

Black aluminum backplate

The included backplate fastens to the rear of the graphics card PCB. It stays outside the coolant path.

Key Specifications

Model (SKU)N-ST4080SRTNOC-X
Cooling coverageGPU die, graphics memory, voltage regulators
Cold plateNickel-plated T2 copper
TopClear PMMA acrylic
BackplateBlack aluminum backplate
Coolant portsG1/4 internal threads
Lighting5V 3-pin addressable RGB (RBW)
Block (L × W × T)227.40 × 136.65 × 26.35 mm
Backplate (L × W × T)227.40 × 106.65 × 6.00 mm
Bykski N-ST4080SRTNOC-X dimension drawing with the water block above the backplate and a side view of each

Bykski drawing. Water block above, backplate below. Dimensions are in millimeters.

Which Version Do I Need?

Check the full model name on your ZOTAC card, including whether it says SUPER.

Bykski N-ST4080SRTNOC-XTHIS PAGE
Choose this block for a ZOTAC RTX 4080 SUPER Trinity card with a matching part number and PCB from the list above.
Compare this full-armor water block if you have the ZOTAC RTX 4080 AMP Extreme AIRO. Check your PCB against its listing.

What's in the Box

1 × full-cover GPU water block1 × aluminum backplate2× G1/4 stop plugs1 × mounting hardware set1 × thermal pad set1 × 5V ARGB light strip

Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.

Installation & Use

1
Power off the PC and remove the graphics card. Remove its stock cooler and backplate, then clean off the old thermal materials.
2
Place the included thermal pads on the memory and power components specified for your PCB. Apply your own thermal paste to the GPU die.
3
Align the block with the PCB mounting holes. Fit the washers and spring screws, tighten evenly, then secure the supplied backplate with its screws.
4
Connect the tubing with G1/4 fittings. Follow the inlet and outlet markings on the block and seal unused ports with the included G1/4 stop plugs.
5
Check the light strip’s plug, then use a matching 5V RBW adapter cable to connect it to your motherboard’s 5V 3-pin ARGB header. Do not connect it to a 12V 4-pin RGB header.
6
Fill and leak-test the loop with the graphics card unpowered before starting the PC.

You also need a pump, radiator, G1/4 fittings, tubing, and coolant.

Bykski N-ST4080SRTNOC-X exploded installation drawing showing the water block, pads, graphics card PCB, and backplate

1 Water block · 2 Thermal pads · 3 Graphics card PCB · 4 Washers · 5 Spring screws · 6 Backplate · 7 Backplate screws

FAQ

How do I check that my RTX 4080 SUPER Trinity fits?

Find the ZOTAC part number on your card and compare it with the Compatibility list. Confirm the exact PCB layout before ordering.

Is this an RTX 4080 SUPER AIO cooler?

It is a water block for a custom loop. Using it requires a separate pump, radiator, fittings, tubing, and coolant.

Which fittings do I need for this GPU water block?

Use G1/4 fittings sized for the type and diameter of your tubing.

Which header powers the lighting?

For motherboard sync, match a 5V RBW adapter cable to the light strip’s plug and connect the cable to a 5V 3-pin ARGB header. A 12V 4-pin RGB header can damage the LEDs.

Notes
  • This is a repair or replacement-only item. Returns are not accepted in principle on compatibility issues or if the block has had water/fluid run through it.
  • The manufacturer reserves the right to alter the block design to expand compatibility or upgrade/modify the product. The delivered item may not 100% match the pictured item.
  • Not responsible for any damage caused by or when using this product. Please use it at your own risk.
  • The copper plate of the block is processed by CNC machines. The machining marks and slightly uneven on the copper plate are normal and do not affect the use of the block. Please pay attention to this.

FormulaMod Official Store

Recent Reviews
+