• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Bykski

PNY RTX 4070 12GB VERTO Full-Cover Water Block with Backplate | Bykski N-PNY4070VERTO-X

stars, based on ( 0 ) review
$146.41 piece
items available
Contact Us
FormulaMod Official Store
Bykski · N-PNY4070VERTO-X

Full-cover water block for the PNY RTX 4070 VERTO

The Bykski N-PNY4070VERTO-X replaces the stock cooler on the PNY GeForce RTX 4070 12GB Gaming VERTO with the matching PCB. Its nickel-plated copper cold plate transfers heat from the GPU, memory, and voltage regulators into a custom liquid cooling loop. An aluminum backplate mounts behind the card.

Fits
PNY RTX 4070 12GB Gaming VERTO
Cold plate
Nickel-plated T2 copper
Port thread
G1/4
Lighting
5V 3-pin ARGB

Compatibility

Check your exact card model and PCB layout.

  • ✓PNY GeForce RTX 4070 12GB Gaming VERTO

Before ordering, compare the full PCB and mounting holes with Bykski’s drawing below.

An older gallery image labels the bare PCB as MSI. Bykski identifies that same PCB photo as PNY.

Bykski N-PNY4070VERTO-X reference drawing of the PNY RTX 4070 PCB, showing the board outline and component layout

Bykski’s PNY RTX 4070 PCB drawing for checking the board layout.

Bykski N-PNY4070VERTO-X guide photo showing the exterior of a PNY GeForce RTX 4070 VERTO with its stock cooler

PNY photo for exterior reference. The stock cooler hides the PCB.

Design Highlights

Bykski N-PNY4070VERTO-X angled front view of the clear acrylic top, port terminal, and cold plate channels

Full-cover copper cold plate

The cold plate picks up heat from the GPU die, memory, and power delivery components. Coolant crosses the jet microchannels under the clear acrylic top and carries heat into the loop.

Bykski N-PNY4070VERTO-X black aluminum backplate with mounting holes and diagonal grooves

Separate aluminum backplate

The included black anodized aluminum plate mounts behind the PCB and stays outside the coolant path.

Bykski N-PNY4070VERTO-X water block illuminated in magenta and blue through its clear top

Bykski lighting illustration.

5V addressable lighting

Check that the plug and pinout match your motherboard’s 5V 3-pin ARGB header. Use a compatible 5V ARGB adapter cable if they differ. Keep the lighting disconnected from 12V 4-pin RGB headers.

Key Specifications

ModelN-PNY4070VERTO-X
Cold plateNickel-plated T2 copper
TopClear acrylic
BackplateBlack anodized aluminum
Cooling coverageGPU die, memory, and VRM
Inlet and outlet threadG1/4
Water block (L × W × T)167.25 × 136.16 × 25.85 mm
Backplate (L × W × T)167.25 × 106.16 × 6.00 mm
Lighting5V 3-pin ARGB (RBW)
Bykski N-PNY4070VERTO-X dimensioned front and side views of the water block and backplate

Bykski drawing. Water block above, backplate below. Measurements are in millimeters.

Which Version Do I Need?

Compare the exact model on your card with the compatibility list for each block.

Bykski N-PNY4070VERTO-XTHIS PAGE
Choose this block for the PNY RTX 4070 12GB Gaming VERTO with the matching PCB.
Check this block if you have the PNY RTX 4080 16GB XLR8 Gaming VERTO EPIC-X RGB OC.

What's in the Box

1 × full-cover GPU water block1 × aluminum backplate2× G1/4 stop plugs5 × 1.5 mm thermal pad strips4 × 0.5 mm insulating washers4 × spring screws1 × M2 × 5 mm screw4 × backplate screws

Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.

Installation & Use

1
Power off the PC, remove the graphics card, and take off the stock cooler. Clean off the old thermal paste and pads.
2
Check that the block’s screw positions match the PCB. Cut the 1.5 mm pads to cover the specified memory and power delivery contacts and apply your own thermal paste to the GPU die.
3
Align the water block, PCB, and backplate. Fit the insulating washers around the GPU mounting holes, tighten the spring screws gradually in a diagonal pattern, and secure the backplate.
4
Connect G1/4 fittings and tubing to the marked inlet and outlet and plug the unused ports. Before wiring the lighting, check the plug and pinout against the motherboard’s 5V 3-pin ARGB header. Use a compatible 5V ARGB adapter cable if they differ. Keep the lighting disconnected from 12V 4-pin RGB headers.
5
Leak-test the loop before powering the graphics card.

You also need a pump, radiator, G1/4 tubing fittings, tubing, and coolant.

Bykski N-PNY4070VERTO-X board diagram showing the GPU die and shaded memory and power delivery pad locations

Bykski’s installation diagram shows the pad positions and the paste location on the GPU die.

FAQ

How do I check whether this RTX 4070 water block fits my card?

Confirm that your card is the PNY GeForce RTX 4070 12GB Gaming VERTO. Use Bykski’s PCB drawing in Compatibility to check the board layout and mounting holes.

Which fittings do I need?

Use G1/4 fittings for the inlet and outlet. Choose fittings sized for your tubing and close unused ports with the two included G1/4 stop plugs.

Is the backplate included?

Yes. A black anodized aluminum backplate mounts behind the PCB and stays outside the coolant path.

How do I connect the 5V ARGB lighting?

Check the plug and pinout against the motherboard’s 5V 3-pin ARGB header and use a compatible 5V ARGB adapter cable if they differ. A 12V 4-pin RGB header can damage the lighting.

Notes
  • This is a repair or replacement-only item. Returns are not accepted in principle on compatibility issues or if the block has had water/fluid run through it.
  • The manufacturer reserves the right to alter the block design to expand compatibility or upgrade/modify the product. The delivered item may not 100% match the pictured item.
  • Not responsible for any damage caused by or when using this product. Please use it at your own risk.
  • The copper plate of the block is processed by CNC machines. The machining marks and slightly uneven on the copper plate are normal and do not affect the use of the block. Please pay attention to this.

FormulaMod Official Store

Recent Reviews
+