Bykski
PNY RTX 4070 12GB VERTO Full-Cover Water Block with Backplate | Bykski N-PNY4070VERTO-X
Full-cover water block for the PNY RTX 4070 VERTO
The Bykski N-PNY4070VERTO-X replaces the stock cooler on the PNY GeForce RTX 4070 12GB Gaming VERTO with the matching PCB. Its nickel-plated copper cold plate transfers heat from the GPU, memory, and voltage regulators into a custom liquid cooling loop. An aluminum backplate mounts behind the card.
Compatibility
Check your exact card model and PCB layout.
- ✓PNY GeForce RTX 4070 12GB Gaming VERTO
Before ordering, compare the full PCB and mounting holes with Bykski’s drawing below.
An older gallery image labels the bare PCB as MSI. Bykski identifies that same PCB photo as PNY.
Design Highlights
Full-cover copper cold plate
The cold plate picks up heat from the GPU die, memory, and power delivery components. Coolant crosses the jet microchannels under the clear acrylic top and carries heat into the loop.
Separate aluminum backplate
The included black anodized aluminum plate mounts behind the PCB and stays outside the coolant path.
5V addressable lighting
Check that the plug and pinout match your motherboard’s 5V 3-pin ARGB header. Use a compatible 5V ARGB adapter cable if they differ. Keep the lighting disconnected from 12V 4-pin RGB headers.
Key Specifications
| Model | N-PNY4070VERTO-X |
|---|---|
| Cold plate | Nickel-plated T2 copper |
| Top | Clear acrylic |
| Backplate | Black anodized aluminum |
| Cooling coverage | GPU die, memory, and VRM |
| Inlet and outlet thread | G1/4 |
| Water block (L × W × T) | 167.25 × 136.16 × 25.85 mm |
| Backplate (L × W × T) | 167.25 × 106.16 × 6.00 mm |
| Lighting | 5V 3-pin ARGB (RBW) |
Which Version Do I Need?
Compare the exact model on your card with the compatibility list for each block.
What's in the Box
Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.
Installation & Use
You also need a pump, radiator, G1/4 tubing fittings, tubing, and coolant.
FAQ
How do I check whether this RTX 4070 water block fits my card?
Confirm that your card is the PNY GeForce RTX 4070 12GB Gaming VERTO. Use Bykski’s PCB drawing in Compatibility to check the board layout and mounting holes.
Which fittings do I need?
Use G1/4 fittings for the inlet and outlet. Choose fittings sized for your tubing and close unused ports with the two included G1/4 stop plugs.
Is the backplate included?
Yes. A black anodized aluminum backplate mounts behind the PCB and stays outside the coolant path.
How do I connect the 5V ARGB lighting?
Check the plug and pinout against the motherboard’s 5V 3-pin ARGB header and use a compatible 5V ARGB adapter cable if they differ. A 12V 4-pin RGB header can damage the lighting.
- This is a repair or replacement-only item. Returns are not accepted in principle on compatibility issues or if the block has had water/fluid run through it.
- The manufacturer reserves the right to alter the block design to expand compatibility or upgrade/modify the product. The delivered item may not 100% match the pictured item.
- Not responsible for any damage caused by or when using this product. Please use it at your own risk.
- The copper plate of the block is processed by CNC machines. The machining marks and slightly uneven on the copper plate are normal and do not affect the use of the block. Please pay attention to this.














