• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Bykski

INNO3D RTX 5090 / MSI RTX 5090 D Water Block, Bykski N-ICH5090DX3-SR-V2 with Backplate

stars, based on ( 0 ) review
€197.79 piece
items available
Contact Us
FormulaMod Official Store
Bykski · N-ICH5090DX3-SR-V2

Full-cover water block for select RTX 5090 and 5090 D cards

The Bykski N-ICH5090DX3-SR-V2 is a full-cover water block for specific INNO3D and MSI GeForce RTX 5090-series boards, including the INNO3D GeForce RTX 5090 X3. It replaces the stock cooler and transfers heat from the GPU, memory, and power delivery components into your custom liquid cooling loop.

Fits
Select INNO3D and MSI PCBs
Cold plate
T2 copper
Ports
G1/4 end ports
Backplate
Aluminum, included

Compatibility

Bykski lists these exact card models for the SR-V2.

  • ✓INNO3D GeForce RTX 5090 D Night X3
  • ✓INNO3D GeForce RTX 5090 iCHILL Frostbite
  • ✓INNO3D GeForce RTX 5090 iCHILL X3
  • ✓INNO3D GeForce RTX 5090 X3
  • ✓INNO3D GeForce RTX 5090 X3 OC
  • ✓MSI GeForce RTX 5090 D VENTUS 3X OC 32G
  • ✓MSI GeForce RTX 5090 D VENTUS 3X 32G

Before ordering, confirm the full card model and compare your entire PCB with Bykski’s reference layout, including the mounting holes and component positions.

Bykski N-ICH5090DX3-SR-V2 compatibility reference photo of a bare GeForce RTX 5090 PCB with the GPU package, memory, and display connectors visible

RTX 5090 PCB reference photo used by Bykski.

Design Highlights

Bykski N-ICH5090DX3-SR-V2 manufacturer illustration of the cold plate’s machined coolant path and central microchannel area

Full-cover copper cold plate

The center of the T2 copper cold plate cools the GPU die. Raised surfaces around it contact the memory and voltage regulators through thermal pads.

Bykski N-ICH5090DX3-SR-V2 angled view of the dark metal cover and the port terminal at the short end

Fittings connect at the end

The G1/4 inlet and outlet sit on the short end of the block. Allow room there for the fittings and tubing when planning your loop.

Bykski N-ICH5090DX3-SR-V2 manufacturer illustration of closely spaced microchannels in the copper cold plate

0.3 mm jet microchannels

The coolant path passes through the microchannels in the center of the cold plate.

Key Specifications

ModelN-ICH5090DX3-SR-V2
Cold plateT2 copper
Body material304 stainless steel
FinishGunmetal
BackplateAluminum, passive
CoverageGPU die, memory, and voltage regulators
Port threadG1/4 female
Water block (L × W × T)233.66 × 129.94 × 16.85 mm
Backplate (L × W × T)209.97 × 130.20 × 3.96 mm
Net weight1.97 kg
Seal materialEPDM
Max. working pressure4 bar
Working temperature−20 to 60 °C
Fluids listed by BykskiWater, ethylene glycol, propylene glycol, fluorinated fluid, and mineral oil
Bykski-listed warranty3 years
Bykski N-ICH5090DX3-SR-V2 dimension drawing showing the water block above the backplate, with plan and end views

Bykski drawing in millimeters. Water block above, backplate below.

Which Version Do I Need?

Start with the compatibility list for the block you’re considering. Then check where the fittings will sit in your build.

N-ICH5090DX3-SR-V2THIS PAGE
Choose this gunmetal block with an opaque cover and end ports if your card matches the SR-V2 list.
Choose this version for an armored frame, a clear acrylic window, and end ports if your PCB matches the X listing.
Choose this version for a clear top and a port terminal on the long edge if your PCB matches the V3 listing.
Choose the FE-specific block if you have an NVIDIA GeForce RTX 5090 Founders Edition.

What's in the Box

1 × full-cover GPU water block1 × aluminum backplateThermal padsBackplate mounting hardware

Supply your own G1/4 plugs for any unused ports.

Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.

Bykski N-ICH5090DX3-SR-V2 flat view of the included dark aluminum backplate and its mounting holes

Installation & Use

1
Shut down and unplug the system, remove the graphics card, and take off its stock cooler. Clean the old thermal material off the GPU die, memory, and power components.
2
Cut the thermal pads to fit the memory and power components shown in the SR-V2 installation diagram. Remove the protective film from both sides before placing the pads. Apply your own thermal paste to the GPU die.
3
Align the block with the PCB mounting holes. Fit the included backplate and tighten the screws gradually and evenly.
4
Connect your tubing to the marked inlet and outlet with G1/4 fittings. Leak-test the finished loop before powering the graphics card.

Have ready a pump, reservoir, radiator, tubing, compatible coolant, and G1/4 fittings sized for your tubing.

Bykski N-ICH5090DX3-SR-V2 numbered exploded diagram showing the water block, thermal pads, GPU PCB, backplate, and screws

1 · Water block   2 · Thermal pads   3 · Your GPU PCB   4 · Backplate   5 · Backplate screws

FAQ

How do I check whether my INNO3D RTX 5090 fits?

Match the full model name to the compatibility list, then compare your entire PCB with Bykski’s reference photo before ordering.

Which Bykski water block fits the RTX 5090 Founders Edition?

Choose the Bykski N-RTX5090FE-SR listed in the version guide for the NVIDIA GeForce RTX 5090 Founders Edition.

Does the included backplate need a coolant connection?

The aluminum backplate is passive. The coolant connects to the ports on the water block.

Which fittings do I need?

Use G1/4 fittings at the inlet and outlet. Pick fittings sized for the tubing in your loop.

What else do I need to water-cool my RTX 5090?

You’ll need a custom loop with a pump, reservoir, radiator, tubing, compatible coolant, and fittings.

Notes
  • 4. We are not responsible for any damage caused during the use of this product. Please use it at your own risk.
  • The copper plate of the water block is machined by a CNC machine tool. Machining marks and slight unevenness on the copper plate are normal and do not affect the use of the water block. Please note this.

FormulaMod Official Store

Recent Reviews
+