Bykski
Gigabyte RTX 5090 Gaming OC GPU Water Block with Backplate | Bykski N-GV5090DWF-X
Full-cover GPU water block with end-mounted ports
The Bykski N-GV5090DWF-X is a full-cover water block for a custom loop on supported Gigabyte cards, including the GeForce RTX 5090 GAMING OC 32G. Its nickel-plated copper cold plate transfers heat from the GPU, memory, and voltage regulators to the coolant. The block has end-mounted G1/4 ports and comes with an aluminum backplate.
Compatibility
Bykski lists these specific Gigabyte card layouts for the N-GV5090DWF-X.
- ✓Gigabyte GeForce RTX 5090 GAMING OC 32G (GV-N5090GAMING OC-32GD)
- ✓Gigabyte GeForce RTX 5090 D GAMING OC 32G (GV-N509DGAMING OC-32GD)
- ✓Gigabyte GeForce RTX 5090 D WINDFORCE 32G (GV-N509DWF3-32GD)
Check the model number on your card and match the PCB layout, including the screw holes and component positions, to Bykski’s reference before ordering.
Design Highlights
End-mounted ports and acrylic window
The inlet and outlet sit at the short end of the block. Use G1/4 fittings there and check the clearance you need for the fittings and tubing. The acrylic window gives you a view of the coolant channels.
Copper cold plate with microchannels
The nickel-plated copper cold plate has separate contact areas for the GPU die, memory, and voltage regulators. Coolant passes through 0.3 mm microchannels over the GPU contact area.
Separate aluminum backplate
The included black aluminum backplate bolts to the rear of the graphics card. It is passive and sits outside the coolant path.
Key Specifications
| Model | N-GV5090DWF-X |
|---|---|
| Cold plate | Nickel-plated T2 copper |
| Copper plate design (Bykski specification) | 6 mm |
| Microchannel design | 0.3 mm |
| Window | Clear acrylic |
| Backplate | Passive black aluminum |
| Threads and port location | G1/4 inlet and outlet at the short end |
| Water block (L × W × D) | 254.88 × 136.05 × 33.65 mm |
| Backplate envelope (L × W × D) | 254.88 × 136.05 × 25.75 mm |
| Lighting | 5V 3-pin addressable RGB (RBW) |
Which Version Do I Need?
Confirm the PCB against each block’s compatibility list, then check where the fittings will sit in your case.
What's in the Box
Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.
Installation & Use
You also need a pump, reservoir, radiator, coolant, tubing, and G1/4 fittings sized for your tubing.
FAQ
Does this block fit the Gigabyte RTX 5090 Gaming OC?
Yes. Bykski lists both the RTX 5090 GAMING OC 32G and RTX 5090 D GAMING OC 32G. Check the card model number and PCB against the compatibility section.
Is the included backplate water-cooled?
It is a passive aluminum backplate that mounts behind the PCB, outside the coolant path.
Which fittings does the block take?
Use G1/4 fittings that match your tubing. The inlet and outlet are at the short end of the block.
How do I connect the lighting?
Use a compatible 5V 3-pin ARGB header or controller. A 12V 4-pin RGB header can damage the lighting.
- This is a repair or replacement-only item. Returns are not accepted in principle on compatibility issues or if the block has had water/fluid run through it.
- The manufacturer reserves the right to alter the block design to expand compatibility or upgrade/modify the product. The delivered item may not 100% match the pictured item.
- Not responsible for any damage caused by or when using this product. Please use it at your own risk.
- The copper plate of the block is processed by CNC machines. The machining marks and slightly uneven on the copper plate are normal and do not affect the use of the block. Please pay attention to this.













