Bykski
ASUS Prime RTX 5070 12GB Water Block with Backplate | Bykski N-AS5070PM-X
Full-cover water block for ASUS Prime RTX 5070 12GB
The Bykski N-AS5070PM-X is a full-cover water block for supported ASUS Prime GeForce RTX 5070 12GB GDDR7 boards. It replaces the stock cooler and transfers heat from the GPU core, memory, and voltage regulators to a custom liquid cooling loop. The included aluminum backplate mounts behind the PCB.
Compatibility
Bykski lists these ASUS Prime PCB layouts for this block.
- ✓ASUS Prime GeForce RTX 5070 12GB GDDR7 (PRIME-RTX5070-12G)
- ✓ASUS Prime GeForce RTX 5070 12GB GDDR7 OC Edition (PRIME-RTX5070-O12G)
Not compatible:
- ✗ASUS Prime GeForce RTX 5070 Ti 16GB
Before ordering, check your exact card model and compare its PCB outline, mounting holes, and component layout with Bykski’s drawing.
Design Highlights
A cold plate for the core, memory, and VRM
The raised areas of the cold plate meet the components they cool. Thermal pads bridge the contact surfaces on the memory and voltage regulators.
0.3 mm coolant channels
Coolant passes through fine channels machined into the copper cold plate beneath the clear acrylic top.
Key Specifications
| Model | N-AS5070PM-X |
|---|---|
| Cold plate | Copper |
| Copper cold plate length | 137.4 mm |
| Top | Clear acrylic |
| Backplate | Black aluminum |
| Port thread | G1/4 inlet and outlet |
| Lighting | 5V 3-pin addressable RGB (RBW) |
| Block (L × W × T) | 191.06 × 151.58 × 26.15 mm |
| Backplate (L × W × T) | 191.06 × 121.53 × 6.11 mm |
Which Version Do I Need?
Use the full card model on the label to choose a block.
What's in the Box
Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.
Installation & Use
You also need a pump, radiator, G1/4 fittings, tubing, and coolant.
FAQ
Does this fit the ASUS Prime RTX 5070 Ti?
The Prime RTX 5070 Ti 16GB uses a different block. Check the comparison above for its part number.
Does this block come with a backplate?
Yes. One black aluminum backplate is included, and coolant runs through the front block.
What fittings should I use?
Use G1/4 fittings and match them to your tubing.
Which RGB header should I use?
Use a compatible 5V 3-pin ARGB connection. A 12V RGB header can damage the LEDs.
Can this replace the stock cooler on its own?
It replaces the stock cooler as part of a custom loop. You will also need a pump, radiator, fittings, tubing, and coolant.
- This is a repair or replacement-only item. Returns are not accepted in principle on compatibility issues or if the block has had water/fluid run through it.
- The manufacturer reserves the right to alter the block design to expand compatibility or upgrade/modify the product. The delivered item may not 100% match the pictured item.
- Not responsible for any damage caused by or when using this product. Please use it at your own risk.














