Bykski
XFX RX 6900 XT / 6800 XT Water Block for Select MERC 319 PCBs, Bykski A-XF6900XT-X
Full-cover water block for XFX MERC 319
The Bykski A-XF6900XT-X replaces the stock cooler on the XFX Radeon RX 6900 XT Speedster MERC 319 Ultra. Its copper cold plate cools the GPU core, memory, and voltage regulators in a custom liquid cooling loop. The block connects through G1/4 ports and comes with an aluminum backplate and 5V addressable lighting.
Compatibility
Confirmed card and PCB combinations
- ✓XFX Radeon RX 6900 XT Speedster MERC 319 Ultra (RX-69XTACUD9)
- ✓XFX Radeon RX 6800 XT Speedster MERC 319 (V1 PCB only)
Not compatible:
- ✗XFX Radeon RX 6800 XT Overseas Edition (V2 PCB)
Before ordering, confirm your exact card model and compare the full PCB layout, component locations, and mounting holes.
Design Highlights
Jet microchannels over the GPU core
Coolant passes through a bank of fine channels where the copper plate contacts the GPU core.
5V addressable lighting
Connect the light strip to your motherboard with a matching 5V 3-pin ARGB adapter cable, or use a compatible 5V RBW controller. A 12V 4-pin RGB header will damage the strip.
Key Specifications
| Model | Bykski A-XF6900XT-X |
|---|---|
| Cold plate | High-purity copper |
| Top | Clear acrylic |
| Backplate | Black aluminum, outside the coolant path |
| Backplate dimensions (L × H × T) | 266.49 × 117.48 × 6 mm (manufacturer’s drawing) |
| Port thread | G1/4 inlet and outlet |
| Lighting | 5V 3-pin addressable RGB (RBW) |
Which Version Do I Need?
Check the PCB revision before choosing a block for an XFX RX 6800-series card.
What's in the Box
Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.
Installation & Use
You’ll need a pump, reservoir, radiator, tubing, matching G1/4 fittings, coolant, and your own thermal paste.
FAQ
Does this fit the XFX RX 6800 XT Speedster MERC 319?
It fits the V1 PCB. For the V2 PCB, compare your board with the A-XF6800-X listing.
Are thermal pads included?
The package includes one set of thermal pads. Apply them to the specified memory and power delivery contact points.
Is there an English installation manual?
The product does not come with English instructions. See the diagrams and mounting steps above.
What fittings does the block use?
Use G1/4 fittings for the inlet and outlet. Choose fittings that match the tubing in your loop.
Which header powers the lighting?
Use a matching 5V 3-pin ARGB adapter cable for a motherboard connection or use a compatible 5V RBW controller. A 12V 4-pin RGB header will damage the LEDs.
- This is a repair or replace only item. Returns not accepted on compatibility issues or block has had water/fluid run through it.
- Manufacturer reserves right to alter block design to expand compatibility. Delivered item may not 100% match pictured item. Product does NOT come with English instructions.
- Not responsible for any damage caused by or when using this product. Please use at your own risk.














