Bykski
MSI RTX 3080/3090 GPU Water Block for GAMING X TRIO & SUPRIM X, Bykski N-MS3090TRIO-X
Full-cover GPU water block for MSI RTX 3080 and 3090
The Bykski N-MS3090TRIO-X replaces the stock cooler on select MSI GeForce RTX 3080 and RTX 3090 GAMING X TRIO and SUPRIM X cards. Its copper cold plate transfers heat from the GPU core, memory, and power delivery components to a custom liquid cooling loop. It includes a passive aluminum backplate.
Compatibility
This block fits the specified PCB layouts of these MSI cards.
- ✓MSI GeForce RTX 3080 GAMING X TRIO 10G
- ✓MSI GeForce RTX 3080 SUPRIM X 10G
- ✓MSI GeForce RTX 3090 GAMING X TRIO 24G
- ✓MSI GeForce RTX 3090 SUPRIM X 24G
Not compatible:
- ✗MSI GeForce RTX 3090 VENTUS 3X 24G OC
- ✗MSI GeForce RTX 3090 Ti GAMING X TRIO 24G
- ✗MSI GeForce RTX 3090 Ti SUPRIM X 24G
Before ordering, verify the full model on your card and check that the PCB layout matches the one specified for that model.
Design Highlights
One cold plate for the GPU, memory, and VRM
The copper plate contacts the GPU core and uses thermal pads at the specified memory and voltage regulator contact points. Coolant carries heat away from the plate.
The jet microchannels sit beneath the clear acrylic top.
5V addressable lighting
Run the RBW light strip from a compatible 5V ARGB controller or a 5V 3-pin motherboard header with the appropriate adapter. Keep the strip off 12V RGB headers.
Key Specifications
| Model | N-MS3090TRIO-X |
|---|---|
| Cold plate | Copper |
| Top | Clear acrylic |
| Backplate | Black aluminum, passive |
| Cooling coverage | GPU core, memory, and VRM |
| Port thread | G1/4 |
| Water block (L × W × T) | 278.3 × 157.9 × 23.5 mm |
| Lighting | 5V 3-pin ARGB (RBW) |
Which Version Do I Need?
Match your card’s exact model and PCB before choosing a block.
What's in the Box
Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.
Installation & Use
You’ll also need a pump, radiator, G1/4 fittings, tubing, and coolant.
FAQ
Will this water block fit my MSI RTX 3080?
Check the card label for GAMING X TRIO 10G or SUPRIM X 10G. The RTX 3090 photo in Compatibility shows the exterior with its stock cooler. Before ordering, match your card’s actual PCB to the layout specified for its model.
Is this a complete RTX 3090 water cooling kit?
It’s the GPU block and backplate for a custom loop. A complete loop also needs a pump, radiator, G1/4 fittings, tubing, and coolant.
Does coolant flow through the included backplate?
The included aluminum backplate is passive. Coolant flows through the front block.
Which fittings do I need for the block?
Use G1/4 fittings that match your tubing. Use the supplied stop plugs to close unused ports.
Can I plug the lighting into a 12V RGB header?
Use a compatible 5V ARGB controller or a 5V 3-pin ARGB header with the appropriate adapter. A 12V RGB header can damage the light strip.
- For return eligibility and refund options, see FormulaMod’s Return Policy.
- Read the Bykski N-MS3090TRIO-X installation manual before mounting the block. See FormulaMod’s Terms of Service.












