• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Bykski

MSI RTX 3080/3090 GPU Water Block for GAMING X TRIO & SUPRIM X, Bykski N-MS3090TRIO-X

stars, based on ( 0 ) review
$148.98 piece
items available
Contact Us
FormulaMod Official Store
Bykski · N-MS3090TRIO-X

Full-cover GPU water block for MSI RTX 3080 and 3090

The Bykski N-MS3090TRIO-X replaces the stock cooler on select MSI GeForce RTX 3080 and RTX 3090 GAMING X TRIO and SUPRIM X cards. Its copper cold plate transfers heat from the GPU core, memory, and power delivery components to a custom liquid cooling loop. It includes a passive aluminum backplate.

Fits
Select MSI GAMING X TRIO and SUPRIM X PCBs
Ports
G1/4
Backplate
Passive aluminum
Lighting
5V 3-pin ARGB

Compatibility

This block fits the specified PCB layouts of these MSI cards.

  • ✓MSI GeForce RTX 3080 GAMING X TRIO 10G
  • ✓MSI GeForce RTX 3080 SUPRIM X 10G
  • ✓MSI GeForce RTX 3090 GAMING X TRIO 24G
  • ✓MSI GeForce RTX 3090 SUPRIM X 24G

Not compatible:

  • ✗MSI GeForce RTX 3090 VENTUS 3X 24G OC
  • ✗MSI GeForce RTX 3090 Ti GAMING X TRIO 24G
  • ✗MSI GeForce RTX 3090 Ti SUPRIM X 24G

Before ordering, verify the full model on your card and check that the PCB layout matches the one specified for that model.

Bykski N-MS3090TRIO-X fit reference showing the front of an MSI GeForce RTX 3090 GAMING X TRIO 24G with its stock triple-fan cooler

MSI GeForce RTX 3090 GAMING X TRIO 24G shown with its stock cooler.

Design Highlights

Bykski N-MS3090TRIO-X flow illustration showing the coolant path across the full-cover block

Bykski coolant flow schematic. Check the PCB layout specified for your card before installation.

One cold plate for the GPU, memory, and VRM

The copper plate contacts the GPU core and uses thermal pads at the specified memory and voltage regulator contact points. Coolant carries heat away from the plate.

The jet microchannels sit beneath the clear acrylic top.

Bykski N-MS3090TRIO-X water block illuminated in red, purple, white, and teal through the acrylic cover

5V addressable lighting

Run the RBW light strip from a compatible 5V ARGB controller or a 5V 3-pin motherboard header with the appropriate adapter. Keep the strip off 12V RGB headers.

Key Specifications

ModelN-MS3090TRIO-X
Cold plateCopper
TopClear acrylic
BackplateBlack aluminum, passive
Cooling coverageGPU core, memory, and VRM
Port threadG1/4
Water block (L × W × T)278.3 × 157.9 × 23.5 mm
Lighting5V 3-pin ARGB (RBW)
Bykski N-MS3090TRIO-X dimension drawing showing the block and terminal in plan and side views

Bykski water block drawing. Measurements are in millimeters.

Which Version Do I Need?

Match your card’s exact model and PCB before choosing a block.

Bykski N-MS3090TRIO-XTHIS PAGE
Choose this block for a listed GAMING X TRIO or SUPRIM X PCB if you want a passive rear plate.
Choose this version if you want coolant to flow through the rear plate. Check its own PCB compatibility list.
Check this block for the MSI RTX 3090 VENTUS 3X 24G OC.
Check this block for the MSI RTX 3090 Ti GAMING X TRIO 24G or SUPRIM X 24G.

What's in the Box

1 × full-cover GPU water block with 5V 3-pin ARGB lighting1 × passive backplate2× G1/4 stop plugsMounting hardware setThermal pads

Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.

Bykski N-MS3090TRIO-X black passive aluminum backplate with its mounting holes

Included passive backplate.

Installation & Use

1
Power off the PC and remove the graphics card. Remove the stock cooler and backplate, then clean off the old thermal paste and pads.
2
Check that the block lines up with the PCB and its screw holes. Fit the thermal pads to the memory and VRM contact areas specified for your PCB. Apply a thin layer of your own thermal paste to the GPU die.
3
Use the mounting hardware to secure the water block and backplate. Tighten the screws evenly and avoid forcing the block into place.
4
Connect the tubing with G1/4 fittings and close unused ports with the stop plugs. If you use the lighting, connect it to a compatible 5V ARGB source.
5
Fill and bleed the loop. Leak-test it with only the pump powered before turning on the graphics card.

You’ll also need a pump, radiator, G1/4 fittings, tubing, and coolant.

FAQ

Will this water block fit my MSI RTX 3080?

Check the card label for GAMING X TRIO 10G or SUPRIM X 10G. The RTX 3090 photo in Compatibility shows the exterior with its stock cooler. Before ordering, match your card’s actual PCB to the layout specified for its model.

Is this a complete RTX 3090 water cooling kit?

It’s the GPU block and backplate for a custom loop. A complete loop also needs a pump, radiator, G1/4 fittings, tubing, and coolant.

Does coolant flow through the included backplate?

The included aluminum backplate is passive. Coolant flows through the front block.

Which fittings do I need for the block?

Use G1/4 fittings that match your tubing. Use the supplied stop plugs to close unused ports.

Can I plug the lighting into a 12V RGB header?

Use a compatible 5V ARGB controller or a 5V 3-pin ARGB header with the appropriate adapter. A 12V RGB header can damage the light strip.

Notes

FormulaMod Official Store

Recent Reviews
+