Bykski
RX 9070 XT Water Block for ASRock Taichi 16GB OC – Bykski A-AR9070XTTC-X
Full-cover water block for the ASRock RX 9070 XT Taichi
The Bykski A-AR9070XTTC-X replaces the stock cooler on the ASRock Radeon RX 9070 XT Taichi 16GB OC so you can connect the card to a custom liquid cooling loop. The copper cold plate cools the GPU core, memory, and power delivery components. The block includes an aluminum backplate and 5V addressable lighting.
Compatibility
This block fits one ASRock PCB layout.
- ✓ASRock AMD Radeon RX 9070 XT Taichi 16GB OC (RX9070XT TC 16GO)
Not compatible:
- ✗ASRock AMD Radeon RX 9070 XT Challenger 16GB
- ✗PowerColor Reaper Radeon RX 9070 XT
Before ordering, check the model on your card label and compare your PCB layout and mounting holes with Bykski’s bare-board photo.
Design Highlights
One cold plate covers the core, memory, and VRM
The shaped cold plate meets the GPU core and the pad locations for memory and power delivery. The separate aluminum backplate mounts behind the PCB.
Coolant flows through 0.3 mm jet microchannels
The inlet directs coolant through the microchannel area over the GPU core. Match the inlet and outlet markings on the block when connecting your G1/4 fittings.
Clear acrylic with addressable lighting
The clear top shows the coolant channels. The RBW lighting uses a 5V 3-pin ARGB connection.
Key Specifications
| Bykski model | A-AR9070XTTC-X |
|---|---|
| Cold plate | Copper |
| Top | Clear acrylic |
| Backplate | Black aluminum, passive |
| Cooling coverage | GPU core, memory, and VRM |
| Port threads | G1/4 inlet and outlet |
| Block (L × W × T) | 211.87 × 136.70 × 26.53 mm |
| Backplate (L × W × T) | 211.87 × 106.70 × 5.77 mm |
| Lighting | 5V 3-pin ARGB (RBW) |
Which Version Do I Need?
Check the full card name on the label before choosing a block.
What's in the Box
Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.
Installation & Use
For a new loop, you also need a pump, reservoir, radiator, coolant, and tubing with matching G1/4 fittings.
FAQ
Does this fit the ASRock RX 9070 XT Challenger?
Bykski lists the Taichi 16GB OC (RX9070XT TC 16GO) as the only supported card for this block.
Which block should I look for if I have a PowerColor RX 9070 XT Reaper?
Look for Bykski A-PC9070XT-X in the version guide. Match the full PowerColor card name before you order.
What fittings do I need?
Use G1/4 fittings sized for the tubing in your loop. Use the supplied plugs to seal unused openings.
Which header should I use for the lighting?
Use a compatible 5V 3-pin ARGB connection for the RBW lighting. A 12V 4-pin RGB header can damage the LEDs.
- This is a repair or replacement-only item. Returns are not accepted on compatibility issues or if the block has had water/fluid run through it.
- The manufacturer reserves the right to alter the block design to expand compatibility. The delivered item may not 100% match the pictured item.
- This product is designed for self-installation. The manufacturer is not liable for any damages resulting from misuse, including, but not limited to, improper installation or the use of incompatible hardware or fluids. By using this product, you accept all related risks.














