Bykski
Tesla V100 32GB PCIe Waterblock with Backplate | Bykski N-TESLA-V100-32G-X-V2
Full-cover water block for the Tesla V100 32GB PCIe
The Bykski N-TESLA-V100-32G-X-V2 is a full-cover GPU water block with an aluminum backplate for NVIDIA Tesla V100 32GB PCIe cards that match the Bykski PCB reference in the second product gallery image. It replaces the stock cooler and transfers heat from the GPU, memory, and power stages to a custom liquid cooling loop during sustained workloads.
Compatibility
- ✓NVIDIA Tesla V100 32GB PCIe (PCB must match the Bykski reference)
Before ordering, compare your exact card model and full PCB layout with the Bykski reference in the second product gallery image.
Design Highlights
Full-cover copper cold plate
The T2 copper cold plate draws heat from the GPU, memory, and power stages. Coolant flows through jet microchannels with 0.5 mm gaps between the fins.
Rear ports for flexible tubing
The rear G1/4 ports sit in a black POM terminal. Either port can serve as the inlet, so you can choose the flow direction that suits your tubing route. The rear placement is designed to leave room for the NVLink bridge.
Key Specifications
| Model (SKU) | N-TESLA-V100-32G-X-V2 |
|---|---|
| Cold plate | T2 high-purity copper |
| Front panel | Stainless steel |
| Port terminal | Black POM |
| Port thread | G1/4 |
| Backplate | Aluminum |
| Block dimensions (L × H × T) | 267.55 × 95.40 × 21.70 mm |
| Backplate dimensions (L × H × T) | 266.73 × 106.75 × 6.0 mm |
| Microchannel gap | 0.5 mm |
| Finish color | Black and gunmetal |
| Lighting | None |
Which Version Do I Need?
Both are custom-loop blocks with backplates. Compare your PCB with the reference image for the block you choose and check the tubing route in your case.
Tesla V100 models vary by memory size and board layout. Check your exact model and PCB before choosing a block.
What's in the Box
Thermal paste is not included (it cannot be shipped by air). Please use your own GPU thermal paste during installation.
Installation & Use
You also need G1/4 tubing fittings, tubing, a pump, a reservoir, a radiator with fans, and coolant.
FAQ
What type of cooling does this Tesla V100 waterblock provide?
It replaces the stock cooler with a full-cover block that transfers heat from the GPU, memory, and power stages to a custom liquid cooling loop.
Can I use either rear port as the inlet?
Yes. On the X-V2, either G1/4 port can serve as the inlet. Choose the direction that suits your tubing route.
Do I need a separate pump and radiator?
Yes. The block connects to a custom loop with a pump, reservoir, radiator, and tubing.
How do I check whether it fits my case?
Start with the block and backplate dimensions above. Check the space for fittings and tubing at the end of the card, and make sure the case has a suitable radiator mount.
Which thermal pads go on the card?
Use the supplied 1.2 mm pad strips at the memory and MOSFET contact areas identified by Bykski. The GPU die uses thermal paste.
- This is a repair or replacement-only item. Returns are not accepted on compatibility issues or if the block has had water/fluid run through it.
- The manufacturer reserves the right to alter the block design to expand compatibility. The delivered item may not 100% match the pictured item.
- Not responsible for any damage caused by or when using this product. Please use it at your own risk.












