Bykski
NVIDIA Tesla L40 48GB PCIe Water Block with Backplate | Bykski N-TESLA-L40-X
Full-cover water block for the NVIDIA L40 48GB PCIe
The Bykski N-TESLA-L40-X is a full-cover water block for the NVIDIA L40 48GB PCIe data center GPU. It replaces the card’s passive heatsink and connects to a custom liquid cooling loop. Its nickel-plated copper cold plate draws heat from the GPU die, memory, and power stages. The included aluminum backplate mounts behind the PCB.
Compatibility
Bykski lists one PCB layout for this block.
- ✓NVIDIA L40 48GB PCIe
Bykski also calls this card the Tesla L40. Before ordering, match your card’s exact PCB layout and mounting holes to Bykski’s PCB drawings.
Design Highlights
Full-cover copper cold plate
The 157.09 mm copper plate spans the contact areas on the front of the card. The aluminum backplate fastens behind the PCB, outside the coolant path.
0.3 mm jet microchannels
Bykski specifies up to 44 channels in the cold plate. The microchannels increase the area where coolant contacts the copper.
Coolant path through the cold plate
Follow the inlet and outlet markings when plumbing the block. Coolant carries heat from the cold plate to the radiator in your loop.
Key Specifications
| Model (SKU) | N-TESLA-L40-X |
|---|---|
| Cooling type | Full-cover block for a custom loop |
| Cold plate | Nickel-plated T2 copper |
| Cold plate length | 157.09 mm |
| Microchannels | 0.3 mm jet microchannels |
| Backplate | Black aluminum |
| Water block (L × W × T) | 271.59 × 97.04 × 37.91 mm |
| Backplate (L × W × T) | 179.39 × 97.04 × 5.00 mm |
| Thermal pads | 1.5 mm |
Which Version Do I Need?
Check the model on your card first. NVIDIA lists the L40, L40S, and Tesla P40 as separate models.
What's in the Box
Thermal paste is not included (it cannot be shipped by air). Please use your own GPU thermal paste during installation.
Installation & Use
You also need a pump, reservoir, radiator with fans, compatible fittings, tubing, and coolant.
FAQ
How does the NVIDIA L40 cool in stock form?
The stock L40 has a passive heatsink that relies on chassis airflow. With this block installed, your pump circulates coolant through the block and radiator.
Do I need a separate pump and radiator?
Yes. This block connects to a custom loop, so supply a pump, radiator, and the other loop parts listed above.
Why does the backplate in the photos say N-RTX6000-X-BE?
Bykski uses the same aluminum backplate with the N-RTX6000-X. Use the L40 PCB drawings and compatibility list to identify the right water block.
What space should I check before installing the block?
Compare the block drawing with the space around your card. Allow room for fittings and tubing at the terminal, plus space for your loop’s radiator.
- The copper plate of the block is processed by CNC machines. The machining marks and slightly uneven on the copper plate are normal and do not affect the use of the block. Please pay attention to this.













