Bykski
NVIDIA L4 Water Block with Backplate (Tesla L4) | Bykski N-TESLA-L4-X
Full-cover water block for the NVIDIA L4
The Bykski N-TESLA-L4-X is a full-cover water block with an aluminum backplate for the 24 GB NVIDIA L4 Tensor Core PCIe card. It replaces the stock passive heatsink and transfers heat from the GPU, memory, and power stages to coolant, which carries it to a radiator in your custom loop.
Compatibility
- ✓NVIDIA L4 Tensor Core GPU (Tesla L4, 24 GB PCIe)
The stock card is low-profile and single-slot. Compare your bare PCB with the installation diagram before ordering.
Design Highlights
Nickel-plated T2 copper
The cold plate spans the GPU, memory, and power stages. Bykski lists the T2 copper at 401 W/(m·K) and gives the copper plate a length of 139.73 mm.
Coolant flows through 0.3 mm microchannels
The flow path passes through a fin array over the GPU. Bykski lists up to 44 waterways and about 9,391 mm² of wetted surface area.
Two ports at one end
The inlet and outlet are together on the short end of the block, where you connect the tubing for your custom loop.
Key Specifications
| Model | N-TESLA-L4-X |
|---|---|
| Block type | Full-cover GPU block for a custom loop |
| Cold plate | Nickel-plated T2 copper |
| Body material | Metal and POM |
| Backplate | Black aluminum |
| Coolant connections | Two end ports |
| Block size | 185.40 × 87.84 × 16.00 mm |
| Backplate size | 157.60 × 71.60 × 5.00 mm |
Which Version Do I Need?
Match the GPU model first. The L4 has 24 GB of memory, while the L40 is a separate 48 GB card.
What's in the Box
Thermal paste is not included (it cannot be shipped by air). Please use your own GPU thermal paste during installation.
Installation & Use
You also need a pump, a reservoir, a radiator with fans, tubing, coolant, and fittings that match the block ports and your tubing.
FAQ
Does the NVIDIA L4 use passive cooling?
Yes. The stock L4 has a passive heatsink that relies on system airflow. NVIDIA specifies a maximum thermal design power of 72 W.
What is POM on this water block?
POM stands for polyoxymethylene. Bykski uses it alongside metal in the body of this block.
Do I need a separate pump and radiator?
Yes. Use this block in a custom loop with a pump and radiator.
How do I check case clearance?
Use the block and backplate dimensions above to check the space around the card. Leave additional room for fittings and tubing and verify you have a place to mount the radiator.
- The copper plate of the block is processed by CNC machines. The machining marks and slightly uneven on the copper plate are normal and do not affect the use of the block. Please pay attention to this.













