Bykski
NVIDIA A100 and A800 80GB PCIe Water Block with Backplate | Bykski N-TESLA-A100-80G-X-V2
Full-cover GPU water block for NVIDIA A100 and A800 80GB PCIe
The Bykski N-TESLA-A100-80G-X-V2 is a full-cover GPU water block with an aluminum backplate for converting supported 80GB NVIDIA PCIe cards to custom liquid cooling. It replaces the stock passive heatsink and carries heat from the GPU core, memory and power delivery components into the loop through rear G1/4 ports.
Compatibility
Supported cards with the specified PCB layout
- ✓NVIDIA A100 80GB PCIe (stock passive version)
- ✓NVIDIA A800 80GB PCIe (stock passive version)
Not compatible:
- ✗NVIDIA A100 40GB PCIe
- ✗NVIDIA A800 40GB Active
- ✗NVIDIA A100 80GB SXM
- ✗NVIDIA A800 80GB SXM4
Compare the mounting holes and component layout on your exact PCB with the Bykski reference before ordering.
Design Highlights
A copper cold plate for the GPU, memory and VRM
The nickel-plated T2 copper cold plate draws heat from the GPU core, memory and power delivery components. The rear G1/4 inlet and outlet sit in a POM terminal positioned to leave room for the NVLink bridge.
0.5 mm jet microchannels
Coolant flows through the cold plate’s fin section. Bykski specifies a 0.5 mm gap between fins.
Key Specifications
| Model | N-TESLA-A100-80G-X-V2 |
|---|---|
| Coverage | GPU core, memory and VRM |
| Cold plate | Nickel-plated T2 high-purity copper |
| Copper thermal conductivity | 401 W/(m·K), manufacturer-listed material value |
| Top panel | Stainless steel |
| Backplate | Black anodized aluminum, outside the coolant path |
| Microchannel gap | 0.5 mm |
| Inlet and outlet | Rear G1/4 ports in a POM terminal |
| Block dimensions | 264.45 × 96.31 × 35.54 mm (length × height × thickness) |
| Backplate dimensions | 218.52 × 95.86 × 6.00 mm (length × height × thickness) |
| Lighting | None |
Which Version Do I Need?
Check the GPU’s memory size and board layout first. Compare the PCB guide for the 80GB cooler you plan to order.
What's in the Box
Thermal paste is not included (it cannot be shipped by air). Please use your own GPU thermal paste during installation.
Installation & Use
You also need a pump, reservoir, radiator with fans, G1/4 fittings sized for your tubing, tubing and coolant.
FAQ
Will it fit an 80GB SXM card?
This block fits the NVIDIA 80GB PCIe cards listed above when their PCB layouts match Bykski’s compatibility guide. Check your card’s form factor and PCB before ordering.
Do I need a separate pump and radiator?
Yes. Use this block with a pump, reservoir and fan-cooled radiator in a custom loop. A pump-reservoir combo can fill both roles.
How do I check case clearance?
Use the block dimensions to check clearance around the card and leave room at the rear for the fittings and tubing. Check your case’s radiator mounts before choosing a radiator.
Can I keep the NVLink bridge?
Bykski positions the inlet and outlet at the rear to leave room for the bridge. Check that your fittings and tubing also clear it.
Can I water-cool my NVIDIA A100 or A800 80GB PCIe card?
Yes, if you have a stock passive card with a supported PCB. This water block replaces the original heatsink and connects to a custom liquid cooling loop. For an A800, confirm your exact board layout with Bykski before ordering.
- This is a repair or replacement-only item. Returns are not accepted on compatibility issues or if the block has had water/fluid run through it.
- The manufacturer reserves the right to alter the block design to expand compatibility. The delivered item may not 100% match the pictured item.
- Not responsible for any damage caused by or when using this product. Please use it at your own risk.












