• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Bykski

RTX A5000 Water Block – Bykski N-RTXA5000-X-V2 for Leadtek 24GB, with Backplate

stars, based on ( 0 ) review
$194.13 piece
items available
Contact Us
FormulaMod Official Store
Bykski · N-RTXA5000-X-V2

Full-cover water block for the Leadtek RTX A5000

The Bykski N-RTXA5000-X-V2 is a full-cover GPU water block with a backplate for the Leadtek NVIDIA RTX A5000 24GB desktop graphics card. It replaces the factory air cooler and transfers heat from the GPU core, memory, and power stages to a custom liquid cooling loop. Bykski positions the G1/4 ports at the rear to avoid the NVLink bridge area.

Fits
Leadtek RTX A5000 24GB
Coverage
GPU, memory, and power stages
Cold plate
Nickel-plated T2 copper
Ports
Rear G1/4

Compatibility

Compatible PCB

  • ✓Leadtek NVIDIA RTX A5000 24GB (Ampere desktop card, full-height PCIe)

The compatibility graphic in the product gallery has an incorrect table heading. Use the Leadtek RTX A5000 24GB PCB drawing shown here.

Before ordering, check that your card's PCB layout and mounting holes match this drawing.

Bykski N-RTXA5000-X-V2 fit reference drawing of the Leadtek RTX A5000 PCB and its power lead

Leadtek RTX A5000 PCB layout (Bykski drawing).

Design Highlights

Bykski N-RTXA5000-X-V2 cold plate with raised contact surfaces for the GPU, memory, and power stages

One cold plate for the GPU, memory, and power stages

The nickel-plated T2 copper cold plate draws heat from the GPU die and the padded memory and power components. Coolant carries their heat out to the radiator.

Bykski N-RTXA5000-X-V2 top cover with its port terminal at the right end

Rear ports positioned for NVLink clearance

The G1/4 inlet and outlet sit in a black POM terminal at the end of the card. Bykski placed them there to keep tubing away from the NVLink bridge.

Bykski N-RTXA5000-X-V2 illustration of the closely spaced fins on the copper cold plate

Jet microchannels

Coolant passes through a field of closely spaced fins in the copper cold plate to pick up heat.

Key Specifications

ModelN-RTXA5000-X-V2
TypeFull-cover GPU water block for a custom loop
CoverageGPU core, memory, and power stages
Cold plateNickel-plated T2 copper
Copper thermal conductivity401 W/(m·K) (Bykski material specification)
Top panelStainless steel
Port terminalBlack POM
BackplateBlack anodized aluminum, outside the coolant path
PortsRear G1/4 inlet and outlet
Block dimensions259.70 × 96.90 × 18.00 mm
Backplate dimensions214.36 × 97.68 × 5.00 mm
LightingNone
Bykski N-RTXA5000-X-V2 block length, width, and thickness drawing

Water block dimensions in millimeters (Bykski drawing).

Which Version Do I Need?

Choose based on how you want to cool your Leadtek RTX A5000.

Bykski N-RTXA5000-X-V2THIS PAGE
Choose this water block if you have a custom loop or want to select your own pump, radiator, and tubing.
Choose the all-in-one kit if you want the GPU block, pump, tubing, and radiator in one assembly.

Check the GPU name on your card. RTX 5000 Ada Generation, RTX PRO 5000 Blackwell, and RTX A5000 Laptop GPU are separate models.

What's in the Box

1 × Full-cover GPU water block1 × Aluminum backplate1 set of mounting hardware5 × Thermal pads

Thermal paste is not included (it cannot be shipped by air). Please use your own GPU thermal paste during installation.

Installation & Use

1
Shut down the system, remove the graphics card, and take off the stock cooler. Clean off the old paste and pad residue.
2
Dry-fit the block to confirm the mounting holes line up. Remove the protective film from both sides of each pad and place the pads on the memory and MOSFETs shown in the diagram. Leave the inductors uncovered and apply a thin layer of your own thermal paste to the GPU die.
3
Align the block, PCB, and backplate. Place the insulating washers at the GPU mounting holes, tighten the spring screws gradually in a diagonal pattern, then secure the remaining backplate screws.
4
Connect the loop with G1/4 fittings, following the IN and OUT markings on the terminal.
5
Fill the loop and leak-test it with only the pump powered. Power the card once all joints are dry.

You also need a pump, a reservoir or pump-reservoir combo, a radiator with fans, G1/4 fittings that match your tubing, tubing, coolant, and GPU thermal paste.

Bykski N-RTXA5000-X-V2 installation drawing showing thermal pads around the central GPU die

Dark strips mark pad locations on the memory and MOSFETs. The center square is the GPU die (Bykski drawing).

FAQ

Will this block fit my RTX A5000?

It fits the Leadtek NVIDIA RTX A5000 24GB desktop PCB shown above. Compare your board with the drawing before ordering.

Does the RTX A5000 come with a fan?

The Leadtek RTX A5000 ships with an active air cooler. This block takes its place and transfers heat to your custom loop.

Do I need a separate pump and radiator?

Yes. This block connects to a custom loop that includes a pump, reservoir, and radiator.

Will the block fit in my workstation case?

Use the dimension drawing to check room for the card, fittings, and tubing at the rear. Check the case's radiator and fan mounting space. If you use NVLink, check the space between the bridge, fittings, and tubing.

Why does the backplate in the gallery carry a different model name?

Bykski shares the backplate with another block. Use the Leadtek PCB drawing to check which card this water block fits.

Notes
  • This is a repair or replacement-only item. Returns are not accepted in principle on compatibility issues or if the block has had water/fluid run through it.
  • The manufacturer reserves the right to alter the block design to expand compatibility or upgrade/modify the product. The delivered item may not 100% match the pictured item.
  • Not responsible for any damage caused by or when using this product. Please use it at your own risk.
  • The copper plate of the block is processed by CNC machines. The machining marks and slightly uneven on the copper plate are normal and do not affect the use of the block. Please pay attention to this.

FormulaMod Official Store

Recent Reviews
+