• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Bykski

Huawei Atlas 300I Duo Full-Cover Water Block with Backplate | Bykski H-ATLAS300IDUO-X

stars, based on ( 0 ) review
$235.08 piece
items available
Contact Us
FormulaMod Official Store
Bykski · H-ATLAS300IDUO-X

Full-cover water block for the Huawei Atlas 300I Duo

The Bykski H-ATLAS300IDUO-X is a full-cover water block for the Huawei Atlas 300I Duo PCIe inference card. It replaces the stock heatsink, which relies on airflow from chassis fans. The nickel-plated copper cold plate transfers heat from the card’s two Ascend processors, memory, and power circuitry into a custom liquid cooling loop.

Fits
Huawei Atlas 300I Duo
Cold plate
Nickel-plated T2 copper
Backplate
Aluminum, included
Cooling
Custom loop

Compatibility

Bykski lists only the Atlas 300I Duo PCB layout shown.

  • ✓Huawei Atlas 300I Duo Inference Card (full-height, full-length PCIe)

Before ordering, confirm your card’s exact model and compare its bare PCB with the manufacturer’s photo.

Bykski H-ATLAS300IDUO-X compatibility photo of the Huawei Atlas 300I Duo bare PCB with two processors and the PCIe edge connector

Huawei Atlas 300I Duo PCB from Bykski’s H-ATLAS300IDUO-X reference.

Design Highlights

Bykski H-ATLAS300IDUO-X coolant-flow illustration with two microchannel zones in the cold plate

Coolant path illustration by Bykski.

Coolant flows across both processors

Bykski’s H-ATLAS300IDUO-X flow illustration shows coolant passing through two zones, one over each processor.

Bykski H-ATLAS300IDUO-X close-up of the fins that form the jet microchannels

Jet microchannels

The fine channels increase the copper surface area exposed to coolant.

Bykski H-ATLAS300IDUO-X underside illustration showing the copper cold plate and two processor contact areas

Underside illustration by Bykski.

Nickel-plated copper and a separate backplate

The T2 copper cold plate contacts the processors, memory, and power circuitry through the specified thermal materials. The aluminum backplate fastens to the other side of the PCB.

Key Specifications for the Published -X Model

Bykski reference modelH-ATLAS300IDUO-X
Cooling typeFull-cover block for a custom loop
Cold plateNickel-plated T2 copper
Copper plate length257.115 mm
Base copper thermal conductivity401 W/(m·K), as listed by Bykski
Jet microchannels0.3 mm, up to 144 channels
Water channel areaApprox. 87,165 mm², as listed by Bykski
Water block (L × W × T)295.54 × 106.62 × 16.00 mm
Backplate (L × W × T)Aluminum, 266.64 × 106.49 × 5.00 mm
Bykski H-ATLAS300IDUO-X dimension drawing showing the block face and end profile

Bykski’s published H-ATLAS300IDUO-X reference drawing. Dimensions are in millimeters.

Which Version Do I Need?

Check the model name on your card before choosing a block.

Bykski H-ATLAS300IDUO-XTHIS PAGE
Choose this block for an Atlas 300I Duo PCB that matches the photo if you plan to use a custom liquid cooling loop.
This water block is for the Huawei Atlas 300I A2.
This separate water block is for the Huawei Atlas 300.

What's in the Box

Full-cover water blockBackplate

Confirm the accessories supplied with your block before ordering.

Thermal paste is not included (it cannot be shipped by air). Please use your own GPU thermal paste during installation.

Installation & Use

1
Shut down the system, remove the card, and take off the stock heatsink. Clean off the old thermal materials.
2
Bykski specifies 1.5 mm pads in its H-ATLAS300IDUO-X installation reference. Confirm the pad thickness for your block before cutting pads. Follow the marked memory and MOSFET positions and apply your own GPU thermal paste to both processor dies.
3
Align the block, PCB, and backplate with the mounting holes and secure them evenly. Stop if the parts do not line up.
4
Attach fittings and tubing, fill the loop with coolant, and leak-test it before powering the card.

You also need a pump, reservoir, radiator with fans, tubing, matching fittings, and coolant.

Bykski H-ATLAS300IDUO-X front and rear PCB diagrams showing thermal pad positions above a numbered exploded view of the assembly

Bykski’s H-ATLAS300IDUO-X installation reference. Top and middle show the front and rear pad positions. Bottom shows the assembly. 1 Water block · 2 Thermal pads · 3 Card PCB · 4 Backplate · 5 Backplate screws.

FAQ

How is the Atlas 300I Duo cooled from the factory?

Its stock heatsink depends on airflow from chassis fans. This block replaces the heatsink and transfers the card’s heat to coolant in a custom loop.

What are the specs of the Atlas 300I Duo card?

Huawei lists two Ascend 310P processors, 48 GB or 96 GB of LPDDR4X, a PCIe 4.0 x16 interface, and 150 W maximum card power. Match your PCB to the compatibility photo before ordering.

Do I need a separate pump and radiator?

Yes. Use the block with a custom loop that has a pump, reservoir, radiator with fans, tubing, fittings, and coolant.

How much room should I allow in my case?

Verify the dimensions of the block you’ll receive before ordering. Allow clearance for the fittings and tubing, and check where the radiator and fans will mount.

Notes
  • The copper plate of the block is processed by CNC machines. The machining marks and slightly uneven on the copper plate are normal and do not affect the use of the block. Please pay attention to this.

FormulaMod Official Store

Recent Reviews
+