Bykski
Huawei Atlas 300I Duo Full-Cover Water Block with Backplate | Bykski H-ATLAS300IDUO-X
Full-cover water block for the Huawei Atlas 300I Duo
The Bykski H-ATLAS300IDUO-X is a full-cover water block for the Huawei Atlas 300I Duo PCIe inference card. It replaces the stock heatsink, which relies on airflow from chassis fans. The nickel-plated copper cold plate transfers heat from the card’s two Ascend processors, memory, and power circuitry into a custom liquid cooling loop.
Compatibility
Bykski lists only the Atlas 300I Duo PCB layout shown.
- ✓Huawei Atlas 300I Duo Inference Card (full-height, full-length PCIe)
Before ordering, confirm your card’s exact model and compare its bare PCB with the manufacturer’s photo.
Design Highlights
Coolant flows across both processors
Bykski’s H-ATLAS300IDUO-X flow illustration shows coolant passing through two zones, one over each processor.
Nickel-plated copper and a separate backplate
The T2 copper cold plate contacts the processors, memory, and power circuitry through the specified thermal materials. The aluminum backplate fastens to the other side of the PCB.
Key Specifications for the Published -X Model
| Bykski reference model | H-ATLAS300IDUO-X |
|---|---|
| Cooling type | Full-cover block for a custom loop |
| Cold plate | Nickel-plated T2 copper |
| Copper plate length | 257.115 mm |
| Base copper thermal conductivity | 401 W/(m·K), as listed by Bykski |
| Jet microchannels | 0.3 mm, up to 144 channels |
| Water channel area | Approx. 87,165 mm², as listed by Bykski |
| Water block (L × W × T) | 295.54 × 106.62 × 16.00 mm |
| Backplate (L × W × T) | Aluminum, 266.64 × 106.49 × 5.00 mm |
Which Version Do I Need?
Check the model name on your card before choosing a block.
What's in the Box
Confirm the accessories supplied with your block before ordering.
Thermal paste is not included (it cannot be shipped by air). Please use your own GPU thermal paste during installation.
Installation & Use
You also need a pump, reservoir, radiator with fans, tubing, matching fittings, and coolant.
FAQ
How is the Atlas 300I Duo cooled from the factory?
Its stock heatsink depends on airflow from chassis fans. This block replaces the heatsink and transfers the card’s heat to coolant in a custom loop.
What are the specs of the Atlas 300I Duo card?
Huawei lists two Ascend 310P processors, 48 GB or 96 GB of LPDDR4X, a PCIe 4.0 x16 interface, and 150 W maximum card power. Match your PCB to the compatibility photo before ordering.
Do I need a separate pump and radiator?
Yes. Use the block with a custom loop that has a pump, reservoir, radiator with fans, tubing, fittings, and coolant.
How much room should I allow in my case?
Verify the dimensions of the block you’ll receive before ordering. Allow clearance for the fittings and tubing, and check where the radiator and fans will mount.
- The copper plate of the block is processed by CNC machines. The machining marks and slightly uneven on the copper plate are normal and do not affect the use of the block. Please pay attention to this.













