• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Bykski

ASUS TUF RTX 3060 Ti Water Block (O8G) with Backplate | Bykski N-AS3070TITUF-X, fits ASUS TUF RTX 3070 Ti 8GB

stars, based on ( 1 ) reviews
$123.44 piece
items available
Contact Us
FormulaMod Official Store
Bykski · N-AS3070TITUF-X

Full-cover water block for ASUS TUF Gaming RTX 3060 Ti and RTX 3070 Ti

The Bykski N-AS3070TITUF-X replaces the stock cooler on compatible ASUS TUF Gaming cards. Its copper cold plate cools the GPU, memory, and voltage regulators. G1/4 ports connect the block to a custom liquid cooling loop, and the included aluminum backplate mounts behind the card.

Fits
ASUS TUF Gaming RTX 3060 Ti O8G / RTX 3070 Ti 8G
Ports
G1/4
Lighting
5V 3-pin ARGB
Backplate
Black aluminum

Compatibility

Bykski lists these two ASUS TUF Gaming PCB layouts.

  • ✓ASUS TUF Gaming RTX 3070 Ti 8GB (TUF-RTX3070TI-8G-GAMING)
  • ✓ASUS TUF Gaming RTX 3060 Ti OC 8GB (TUF-RTX3060TI-O8G-GAMING)

Before ordering, check the full model code on your card and verify its PCB layout.

Bykski N-AS3070TITUF-X compatibility reference showing the ASUS TUF Gaming RTX 3070 Ti 8GB with its stock three-fan cooler

ASUS product photo of the TUF-RTX3070TI-8G-GAMING.

Design Highlights

Bykski N-AS3070TITUF-X manufacturer diagram showing the coolant path across the block

Bykski schematic of coolant flow through the block.

One cold plate for the GPU, memory, and VRM

The full-cover plate picks up heat from the GPU die, memory modules, and voltage regulators. Coolant carries that heat into the loop.

Bykski N-AS3070TITUF-X close-up illustration of the copper cold plate microchannels

0.3 mm jet microchannels

Coolant passes through narrow channels in the T2 copper plate. The clear acrylic top shows the flow path.

Bykski N-AS3070TITUF-X acrylic water block lit in purple, pink, and blue

5V addressable lighting

The RBW light strip illuminates the clear top. Use a compatible 5V ARGB controller or connect to a 5V 3-pin motherboard header with a matching sync cable.

Key Specifications

ModelN-AS3070TITUF-X
Cold plateT2 copper
TopClear acrylic
BackplateBlack aluminum, outside the coolant path
Port threadG1/4
Microchannel gap0.3 mm
Block width147.55 mm, including the terminal
Backplate (L × W × T)239.85 × 117.55 × 6.00 mm
Lighting5V 3-pin ARGB (Bykski RBW)
Bykski N-AS3070TITUF-X manufacturer drawing of the aluminum backplate with its length, width, and thickness

Bykski backplate drawing. Dimensions in millimeters.

What's in the Box

1 × full-cover GPU water block1 × aluminum backplate2 × G1/4 stop plugs1 × 5V ARGB light stripThermal padsMounting hardware set

Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.

Bykski N-AS3070TITUF-X black aluminum backplate with its mounting holes

Installation & Use

1
Power off the system, remove the graphics card, and take off the stock cooler. Clean off the old thermal materials and check the block’s mounting holes against the PCB.
2
Cut the thermal pads to fit the memory and VRM contact areas shown by Bykski. Apply a thin layer of your own thermal paste to the GPU die.
3
Align the block, card, and backplate. Place the washers and tighten the spring screws around the GPU gradually in a diagonal pattern. Fit the backplate screws in the remaining positions.
4
Connect the G1/4 fittings to the ports marked IN and OUT, then seal the unused ports with the stop plugs. Leak-test the loop before powering the card.

For the loop, have G1/4 tubing fittings, matching tubing, a pump, a radiator, and coolant on hand.

Bykski N-AS3070TITUF-X exploded assembly drawing showing the block, thermal pads, graphics card PCB, washers, screws, and backplate

① water block · ② thermal pads · ③ your graphics card PCB · ④ washers · ⑤ spring screws · ⑥ backplate · ⑦ backplate screws.

FAQ

Which ASUS TUF RTX 3060 Ti does this block fit?

Bykski lists the TUF-RTX3060TI-O8G-GAMING. Verify the complete model code and PCB before ordering.

Which ASUS TUF RTX 3070 Ti does it fit?

Bykski lists the TUF-RTX3070TI-8G-GAMING. Check the PCB layout as well as the model code.

Which fittings do I need?

Use G1/4 tubing fittings that match your tubing. The two included G1/4 stop plugs seal the unused ports.

Can I connect the lighting to a 12V RGB header?

Connect to a 5V 3-pin ARGB header with a matching sync cable, or use a compatible 5V ARGB controller. A 12V RGB header can damage the light strip.

Notes
  • This is a repair or replace only item. Returns not accepted on compatibility issues or if block has had water/fluid run through it.
  • Manufacturer reserves right to alter block design to expand compatibility. Delivered item may not 100% match pictured item. Product does NOT come with English instructions. Please see product gallery images for install guide if available. Generally, thermal pads should be installed on the card where the block has corresponding raised contact points with the exception of the GPU core, which uses thermal paste. Installing pads on other components can lead to improper contact and poor performance.
  • Not responsible for any damage caused by or when using this product. Please use at your own risk.
Recent Reviews ( 1 )
By
eric
Tuesday, 14 December 2021
excellent product, complete, easy to assemble even without real explicit instructions. the finish is very clean, the RGB is present but discret and manageable by the MB, the thermal pads are just enough, so do not miss. On the performance side, the board does not exceed 50c° in charge.
+