• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Bykski

RTX 4090, RTX 4080, RTX 4070 & RTX 3090 AIO GPU Cooler (Select PCBs), 240/360 mm | Bykski B-FRDGPU-X-V2

stars, based on ( 0 ) review
$264.33 piece
items available
Contact Us
FormulaMod Official Store
Bykski · B-FRDGPU-X-V2

All-in-one GPU liquid cooling with a PCB-matched block

The Bykski B-FRDGPU-X-V2 is an all-in-one GPU liquid cooler with a 240 or 360 mm radiator. It replaces the stock cooler on select NVIDIA GeForce RTX 4090 24 GB, RTX 4080 16 GB, RTX 4070 12 GB, and RTX 3090 24 GB cards. A full-cover block matched to your PCB transfers heat from the GPU, memory, and power stages to the radiator.

Fits
Select RTX 4090 / 4080 / 4070 / 3090
Radiator options
240 or 360 mm
Cold plate
Nickel-plated T2 copper
Pump
Inline

Compatibility

Bykski lists these GeForce models. Each requires a block confirmed for your exact PCB.

  • ✓NVIDIA GeForce RTX 4090 24 GB
  • ✓NVIDIA GeForce RTX 4080 16 GB
  • ✓NVIDIA GeForce RTX 4070 12 GB
  • ✓NVIDIA GeForce RTX 3090 24 GB

Send FormulaMod the card maker and the full model number from the card label before ordering so we can verify the PCB layout and match the water block.

NVIDIA GeForce RTX 4090 example PCB line drawing showing the full board outline, GPU position, and mounting holes

Bykski's example NVIDIA GeForce RTX 4090 PCB layout.

Design Highlights

Bykski B-FRDGPU-X-V2-360 assembly with three radiator fans, an inline pump, and braided tubing to the GPU block

360 mm assembly shown with an example GPU block

Inline pump and braided tubing

Braided tubing joins the GPU block and the fan-cooled aluminum radiator. The pump sits in the tubing between the block and radiator.

Bykski B-FRDGPU-X-V2 cold plate close-up showing the parallel microchannel fins

Copper cold plate with jet microchannels

The nickel-plated T2 copper cold plate draws heat from the GPU, memory, and power stages. Bykski's cold plate design uses 0.3 mm jet microchannels.

Bykski B-FRDGPU-X-V2-240 assembly with a two-fan radiator and tubing attached to the GPU block

240 mm assembly shown with an example GPU block

Two radiator sizes

The 240 mm assembly has two fans. The 360 mm assembly has three. Check the case mount and the room available for the radiator, fans, and tubing before choosing.

Key Specifications

240 mm modelB-FRDGPU-X-V2-240
360 mm modelB-FRDGPU-X-V2-360
Radiator length (Bykski drawings)276 mm (240 mm model) / 396 mm (360 mm model)
Radiator materialAluminum
Radiator coolant channels12 in Bykski's design
Cold plateNickel-plated T2 copper
Cold plate microchannels0.3 mm jet microchannels
Cooling coverageGPU, memory, and power stages
Pump placementInline between the block and radiator
TubingBraided
Bykski B-FRDGPU-X-V2-360 side elevation with a 396 mm end-to-end radiator measurement

Bykski dimension drawing for the 360 mm radiator

Which Version Do I Need?

Match the block to your PCB first. Ask FormulaMod to confirm the radiator size for your card and case.

Bykski B-FRDGPU-X-V2 (240 or 360 mm)THIS PAGE
Choose this configurable kit when FormulaMod can match a block to your card. Confirm the radiator size with FormulaMod for your card and case.
Choose this dedicated AIO if you've confirmed an RTX 4090 AIC reference PCB and have room for a 360 mm radiator.
Check this dedicated AIO if you have a GIGABYTE GeForce RTX 4090 WINDFORCE V2 24G. Verify your PCB revision before ordering.
Check this dedicated AIO if you have a PELADN GeForce RTX 4090. Confirm your PCB with FormulaMod.

If you already have a custom loop, choose a standalone water block matched to your PCB.

What's in the Box

1 PCB-matched full-cover GPU water block1 inline pump with braided tubing1 radiator in the selected size2 radiator fans with the 240 mm model or 3 with the 360 mm model

Confirm the backplate and mounting hardware for your selected block before ordering.

Thermal paste is not included (it cannot be shipped by air). Please use your own GPU thermal paste during installation.

Installation & Use

1
Check the fit of the radiator and fans at the case's mounting location. Make sure the tubing can reach the card.
2
Shut down the PC, remove the card, and take off its original cooler. Clean the remaining paste and pad residue.
3
Apply thermal paste to the GPU die. Use the pad thickness and placement specified for your matched block on the memory and power stages.
4
Align the block with the PCB mounting holes and secure it with the matching hardware. Fit the backplate specified for your configuration.
5
Mount the radiator and fans in the case. Connect the pump and fan leads according to the wiring guidance for your kit. Inspect the tube connections before powering on.

You also need a matching case radiator mount, power connections for the pump and fans, and the thermal paste and pads specified for your block.

Bykski B-FRDGPU-X-V2 installation illustration showing the top-mounted radiator, tubing, and connections at the GPU block inside a desktop case

Bykski installation example showing the tubing route from the top-mounted radiator to the GPU block.

FAQ

Is this a universal GPU cooler?

Compatibility depends on the exact PCB. Bykski offers block matching for select GeForce RTX 4090, RTX 4080, RTX 4070, and RTX 3090 cards.

How do I know which block will fit my card?

Send FormulaMod the exact card model and PCB revision, if available, so we can check the correct block before you order.

Do I need to buy a separate pump?

The AIO has an inline pump between the block and radiator.

How much case space should I allow?

Bykski's drawings show end-to-end radiator lengths of 276 mm and 396 mm. Check your case for the matching mount, clearance for the radiator and fans together, and room to route the tubing.

What does the water block cool?

The matched full-cover block cools the GPU die, memory, and power stages.

Notes
  • If the block and PCB mounting holes do not line up, stop and contact FormulaMod before continuing.

FormulaMod Official Store

Recent Reviews
+