Bykski
RTX 5090 AIO Liquid Cooler, 360 mm – Bykski B-FRD-RTX5090-115-360
RTX 5090 AIO liquid cooler with a 360 mm radiator
The Bykski B-FRD-RTX5090-115 replaces the factory cooler on a GeForce RTX 5090 with the PCB layout shown below. A full-cover block draws heat from the GPU, memory, and power stages. The inline pump moves coolant to a case-mounted 360 mm radiator, with a single-card kit and a dual-card kit for two matching cards.
Compatibility
Bykski lists one PCB layout for this cooler.
- ✓NVIDIA GeForce RTX 5090 (32 GB GDDR7) with the PCB layout shown here
Before ordering, verify your exact card and match its mounting holes and component positions to the drawing. If you choose the dual-card kit, check both cards.
Design Highlights
One cooler for a single card
The black B-FRD-RTX5090-115-360 pairs one GPU block and backplate with a three-fan radiator. The pump sits inline on the braided tubing between the block and radiator.
One radiator for two matching cards
The B-FRD-RTX5090-115-360-H connects two GPU blocks to one 360 mm radiator. Check the PCB layout on both cards and allow 63 mm of clearance for the radiator and fans, plus room for the tubing.
Copper cold plate with jet microchannels
The T2 copper plate draws heat from the GPU, memory, and power stages. Coolant passes through 0.3 mm jet microchannels in the block.
Key Specifications
| Single-card kit | B-FRD-RTX5090-115-360 |
|---|---|
| Dual-card kit | B-FRD-RTX5090-115-360-H |
| Color | Black |
| Radiator | 360 mm class, 38 mm thick, aluminum, 12 coolant channels |
| Radiator fans | 3 per kit, 25 mm thick |
| Radiator + fan thickness | 63 mm for both kits |
| Fan speed | 3,008 RPM (±10%) |
| Fan airflow | 105.5 CFM max. |
| Fan static pressure | 5.27 mm H₂O max. |
| Fan noise | 45.6 dBA |
| Cold plate | T2 copper |
| Jet microchannels | 0.3 mm |
| GPU block (L × W × T) | 279.57 × 110.82 × 16.46 mm |
| Inline pump | 7,000 RPM, 450 L/h flow, 7 m head |
| Tubing | Braided |
Which Version Do I Need?
Match the PCB before you choose a cooling setup.
What's in the Box
The single-card kit has one block and backplate set. The dual-card kit has two sets and one shared radiator.
Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.
Installation & Use
You also need your own thermal paste and a case with 63 mm of clearance for the radiator and fans.
FAQ
Which RTX 5090 does this AIO fit?
It fits the GeForce RTX 5090 32 GB GDDR7 board with the layout shown in Compatibility. Compare your mounting holes and component positions before ordering.
What is the difference between the two 360 mm kits?
The single-card kit uses one GPU block. The dual-card kit uses two GPU blocks and one shared radiator. Both kits are 63 mm thick with fans installed.
Will the 360 mm radiator fit my case?
Check for a 360 mm radiator mount and allow 63 mm for the radiator and fans, plus room for the tubing. Current kits ship with the 38 mm radiator; total thickness with fans is 63 mm (older drawings may show 52 mm).
Where does the pump sit?
The pump is inline on the tubing between the GPU block and the radiator. Leave room for the pump when you plan the tubing route.
- If you have any questions, please contact Customer Service.













