• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Bykski

RTX 5090 AIO Liquid Cooler, 360 mm – Bykski B-FRD-RTX5090-115-360

stars, based on ( 0 ) review
items available
Contact Us
FormulaMod Official Store
Bykski · B-FRD-RTX5090-115

RTX 5090 AIO liquid cooler with a 360 mm radiator

The Bykski B-FRD-RTX5090-115 replaces the factory cooler on a GeForce RTX 5090 with the PCB layout shown below. A full-cover block draws heat from the GPU, memory, and power stages. The inline pump moves coolant to a case-mounted 360 mm radiator, with a single-card kit and a dual-card kit for two matching cards.

Fits
GeForce RTX 5090 with the pictured PCB
Radiator
360 mm aluminum
Cold plate
T2 copper

Compatibility

Bykski lists one PCB layout for this cooler.

  • ✓NVIDIA GeForce RTX 5090 (32 GB GDDR7) with the PCB layout shown here

Before ordering, verify your exact card and match its mounting holes and component positions to the drawing. If you choose the dual-card kit, check both cards.

Bykski B-FRD-RTX5090-115 PCB line drawing showing the mounting holes and component layout of the supported GeForce RTX 5090 board

Bykski’s drawing of the supported PCB layout.

Design Highlights

Bykski B-FRD-RTX5090-115-360 single-card cooler with one black GPU block, an inline pump and a three-fan radiator

One cooler for a single card

The black B-FRD-RTX5090-115-360 pairs one GPU block and backplate with a three-fan radiator. The pump sits inline on the braided tubing between the block and radiator.

Bykski B-FRD-RTX5090-115-360-H dual-card cooler with two black GPU blocks and one three-fan radiator

One radiator for two matching cards

The B-FRD-RTX5090-115-360-H connects two GPU blocks to one 360 mm radiator. Check the PCB layout on both cards and allow 63 mm of clearance for the radiator and fans, plus room for the tubing.

Bykski B-FRD-RTX5090-115 manufacturer illustration showing the fine fins in the GPU block’s jet microchannels

Copper cold plate with jet microchannels

The T2 copper plate draws heat from the GPU, memory, and power stages. Coolant passes through 0.3 mm jet microchannels in the block.

Key Specifications

Single-card kitB-FRD-RTX5090-115-360
Dual-card kitB-FRD-RTX5090-115-360-H
ColorBlack
Radiator360 mm class, 38 mm thick, aluminum, 12 coolant channels
Radiator fans3 per kit, 25 mm thick
Radiator + fan thickness63 mm for both kits
Fan speed3,008 RPM (±10%)
Fan airflow105.5 CFM max.
Fan static pressure5.27 mm H₂O max.
Fan noise45.6 dBA
Cold plateT2 copper
Jet microchannels0.3 mm
GPU block (L × W × T)279.57 × 110.82 × 16.46 mm
Inline pump7,000 RPM, 450 L/h flow, 7 m head
TubingBraided
Bykski B-FRD-RTX5090-115 manufacturer drawing showing the GPU water block from above and the side with dimensions

Manufacturer drawing of the GPU block. Dimensions are in millimeters.

Which Version Do I Need?

Match the PCB before you choose a cooling setup.

360 mm GPU AIOTHIS PAGE
Select “360mm” for one matching card or “360mm Thick row(Dual Graphics Cards)” for two matching cards. Both options are 63 mm thick with fans installed.
For a GeForce RTX 5090 Founders Edition, see the AIO made for that board.
Choose the standalone block and backplate if you are building a custom loop. Check its PCB layout before ordering.

What's in the Box

360 mm radiator with inline pump and tubing3 × radiator fansGPU block and backplateThermal padsMounting hardware

The single-card kit has one block and backplate set. The dual-card kit has two sets and one shared radiator.

Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.

Installation & Use

1
Verify the PCB layout and check the case for a 360 mm radiator mount. Allow 63 mm for the radiator and fans, plus room for the tubing and inline pump.
2
Power off the PC and remove the graphics card. Remove the factory cooler and clean off the old thermal material.
3
Use Bykski’s contact map to place thermal pads on the memory and power stages. Apply your own thermal paste to the GPU chip.
4
Align the block with the board’s mounting holes and secure the block and backplate. If the parts do not align, stop and recheck the PCB.
5
Reinstall the card and secure the radiator and fans. Route the tubing in smooth bends. Connect the pump and fans according to the instructions for your kit, then verify that they run.

You also need your own thermal paste and a case with 63 mm of clearance for the radiator and fans.

Bykski B-FRD-RTX5090-115 PCB installation drawing with shaded thermal pad areas and a paste applicator shown over the GPU

Shaded strips mark the pad locations. The applicator points to the GPU chip.

FAQ

Which RTX 5090 does this AIO fit?

It fits the GeForce RTX 5090 32 GB GDDR7 board with the layout shown in Compatibility. Compare your mounting holes and component positions before ordering.

What is the difference between the two 360 mm kits?

The single-card kit uses one GPU block. The dual-card kit uses two GPU blocks and one shared radiator. Both kits are 63 mm thick with fans installed.

Will the 360 mm radiator fit my case?

Check for a 360 mm radiator mount and allow 63 mm for the radiator and fans, plus room for the tubing. Current kits ship with the 38 mm radiator; total thickness with fans is 63 mm (older drawings may show 52 mm).

Where does the pump sit?

The pump is inline on the tubing between the GPU block and the radiator. Leave room for the pump when you plan the tubing route.

Notes
  • If you have any questions, please contact Customer Service.

FormulaMod Official Store

Recent Reviews
+