Bykski
AMD Radeon Instinct MI50 360 mm GPU AIO Liquid Cooler | Bykski B-FRD-MI50
360 mm GPU AIO liquid cooler for the AMD Radeon Instinct MI50
The Bykski B-FRD-MI50 all-in-one liquid cooler replaces the stock cooler on an AMD Radeon Instinct MI50 with the PCB shown below. Bykski shows the single-card kit with an inline pump that circulates coolant between the GPU block and a 360 mm radiator. Choose B-FRD-MI50-360 for one matching MI50 or B-FRD-MI50-360-H for two.
Compatibility
- ✓AMD Radeon Instinct MI50 with the PCB layout shown
Before ordering, compare the entire PCB and mounting-hole positions on each card with Bykski’s photo.
Check your case’s 360 mm radiator mount, allow 63 mm of clearance for the radiator and fans, and leave room to route the tubing.
Design Highlights
Standard single-card assembly
Bykski shows the pump inline on the tubing and three fans mounted on the radiator.
T2 copper cold plate
In Bykski’s single-card design, the cold plate contacts the GPU chip through thermal paste.
0.3 mm jet microchannels
Bykski’s single-card cold plate uses fine channels to give the coolant more surface area to pick up heat.
Key Specifications
| Model | Bykski B-FRD-MI50 |
|---|---|
| Single-card kit | B-FRD-MI50-360 · one matching MI50 |
| Dual-card kit | B-FRD-MI50-360-H · two matching MI50 cards |
| Color | Black |
| Single-card cold plate | T2 copper with 0.3 mm jet microchannels |
| Radiator and fan clearance (both kits) | 360 mm radiator, 38 mm thick. With 25 mm fans fitted, allow 63 mm of clearance. |
| Single-card fans shown | 3 |
| Single-card tubing shown | Braided |
| Single-card block drawing (L × W × T) | 266.46 × 117.01 × 26.07 mm |
| Radiator length in earlier single-card drawing | 396 mm |
Which Version Do I Need?
Choose according to how many matching MI50 cards you plan to cool and the type of loop you’re building.
What's in the Box
Each kit also includes 1 × 360 mm radiator, 3 × 120 mm fans, a pump, thermal pads, and mounting hardware.
Bykski connects the tubing and fills the loop with coolant at the factory.
Thermal paste is not included (it cannot be shipped by air). Please use your own thermal paste during installation.
Standard Single-Card Installation
Have a screwdriver and your own thermal paste ready. Before starting, check the included thermal pads and make sure you have room to mount the radiator.
FAQ
How do I tell whether this AIO fits my MI50?
Match your AMD Radeon Instinct MI50 PCB and its mounting holes to Bykski’s photo above.
Which kit do I need for one or two MI50 cards?
Choose B-FRD-MI50-360 for one matching MI50 or B-FRD-MI50-360-H for two.
What does Bykski show in the standard single-card kit image?
The B-FRD-MI50-360 image shows a GPU block, a radiator with three fans, and an inline pump on the connected tubing.
What is involved in installing the standard single-card kit?
You remove the original cooler, fit the thermal materials and water block, then mount the radiator and connect the pump and fans.
How much room do the radiator and fans need?
Both kits use a 360 mm radiator and require 63 mm of clearance for the radiator and fans. The earlier single-card drawing shows an overall radiator length of 396 mm. Leave room to route the tubing.
- If the block doesn’t line up with your PCB, stop and contact support before tightening the screws.












