Bykski
NVIDIA Tesla T4 AIO Liquid Cooling Kit, Bykski B-FRD-TESLA-T4 360 mm
360 mm AIO liquid cooler for the NVIDIA Tesla T4
The Bykski B-FRD-TESLA-T4 is a 360 mm all-in-one liquid cooler for the NVIDIA Tesla T4 16GB low-profile PCIe GPU. The stock T4 uses a passive heatsink that relies on chassis airflow. The Bykski kit replaces it with a full-cover water block and moves heat to a fan-cooled radiator in inference workstations with a 360 mm mount.
Compatibility
- ✓NVIDIA Tesla T4 16GB GDDR6, single-slot half-height, half-length PCIe GPU with the pictured NVIDIA PCB layout
Compare your card’s PCB layout and mounting holes with the photo before ordering.
Design Highlights
Full-cover GPU block with an inline pump
The T2 copper cold plate draws heat from the GPU core. Thermal pads transfer heat from the memory and power components into the same block.
The pump sits in the tubing between the GPU block and the radiator. The standard 360 mm kit pairs the radiator with three fans.
Aluminum radiator in the standard 360 mm kit
Bykski shows 12 coolant channels for the standard 360 mm kit. The fans move air across the radiator fins to carry heat out of the loop.
Key Specifications
| Model | Bykski B-FRD-TESLA-T4 |
|---|---|
| 360 mm options | B-FRD-TESLA-T4-360 (standard) B-FRD-TESLA-T4-360-H (dual T4) |
| Cold plate | T2 copper with 0.3 mm jet microchannels |
| Radiator, standard kit | 360 mm aluminum, 12 coolant channels (Bykski design) |
| Radiator length | 396 mm (standard drawing) |
| Block dimensions | 201.41 × 100.92 × 16.5 mm (standard drawing) |
| Inline pump, standard kit | 7,000 RPM, rated flow 450 L/h, rated head 7 m |
Which Version Do I Need?
Choose the cooler that matches your card count and the type of loop you are building.
What’s in the Box · Standard 360 mm Kit
For installation, have 1.5 mm thermal pads ready.
Thermal paste is not included (it cannot be shipped by air). Please use your own GPU thermal paste during installation.
Installation & Use
Also needed for the standard kit: a case with a 360 mm radiator mount, matching power connections for the pump and fans, and your own GPU thermal paste.
FAQ
What cooling type does the NVIDIA Tesla T4 use?
The stock 70 W Tesla T4 is passively cooled and depends on air moved through the chassis. This kit replaces the passive heatsink with a liquid cold plate, inline pump, and fan-cooled radiator.
Do I need to buy a separate pump?
The standard AIO includes an inline pump in the tubing between the water block and the radiator.
Will the radiator fit my case?
Look for a 360 mm radiator mount with room for the fans and tubing bends. The standard radiator drawing shows an overall length of 396 mm. Check clearance for the version you plan to install.
What is the -H option?
The -360-H option is the 360 mm thick-radiator configuration for a dual-T4 build. Choose the standard -360 for a single T4.
- If the block does not line up with the PCB screw holes, stop and have a technician check the fit.












