Bykski
NVIDIA H200 NVL 141 GB PCIe AIO Cooling System, Bykski B-FRD-H200, 360 mm
360 mm liquid cooler for the NVIDIA H200 NVL
The Bykski B-FRD-H200 is a full-cover all-in-one liquid cooler for the NVIDIA H200 NVL 141 GB PCIe accelerator with the board layout shown below. The water block replaces the card’s stock passive heatsink. An inline pump moves coolant to a 360 mm radiator, where the radiator fans carry heat out of the loop.
Compatibility
Compatible board
- ✓NVIDIA H200 NVL 141 GB PCIe with the PCB layout shown here
Bykski labels this board NVIDIA Tesla H200 141G in its compatibility drawing. NVIDIA uses 141 GB for both the PCIe NVL card and the H200 SXM module.
Before ordering, compare your card’s PCB with the manufacturer’s reference photo.
Design Highlights
Move GPU heat to a case-mounted radiator
The H200 NVL’s stock heatsink relies on airflow provided by the system. This kit moves heat to a case-mounted radiator with three fans on the standard 360 mm assembly. The inline pump sits in the braided tubing between the radiator and the block.
Full-cover T2 copper cold plate
The cold plate contacts the GPU package and the surrounding components marked in the installation diagram. The 0.3 mm jet microchannels increase the area where coolant contacts the copper.
Key Specifications
| Model | B-FRD-H200 |
|---|---|
| Standard 360 mm model | B-FRD-H200-360 |
| Cold plate | T2 copper |
| Cold plate microchannels | 0.3 mm, up to 48 channels |
| Block dimensions | 266.63 × 98.25 × 16.75 mm |
| Backplate | Black |
| Radiator | 360 mm aluminum |
| Radiator fans | 3 on the standard 360 mm assembly |
| Pump and tubing | Inline pump with braided tubing |
| Thermal pads | 1.5 mm |
Which Version Do I Need?
Start with the board match, then choose a cooler for your case or existing loop.
What's in the Box
Package contents shown are for the standard single-card B-FRD-H200-360.
Thermal paste is not included (it cannot be shipped by air). Please use your own GPU thermal paste during installation.
Installation & Use
You’ll also need a case with a 360 mm radiator mount and clearance for the radiator, fans, and tubing. Have GPU thermal paste and suitable pump and fan power connections ready.
FAQ
How does the NVIDIA H200 NVL cooling system work?
The H200 NVL ships with a passive heatsink that relies on system airflow. The Bykski AIO replaces it with a water block and uses an inline pump to move heat to a fan-cooled 360 mm radiator.
Do I need to buy a separate pump?
The kit includes a pump in the tubing between the GPU block and the radiator.
How can I tell which 141 GB H200 I have?
Check the form factor. The H200 NVL is a PCIe card. The H200 SXM is a module for a different mount. Compare your PCIe board with the photo above.
Will the radiator fit in my case?
Look for a 360 mm radiator mount with room for the fans and the tubing route to the GPU. The manufacturer illustrates a top-mounted radiator in a tower case.
- The PCB shown in the installation drawing identifies the card you supply.












