Bykski
NVIDIA A30X 24GB AIO Liquid Cooler, 360 mm | Bykski B-FRD-Tesla-A30X-24G
360 mm AIO liquid cooler for the NVIDIA A30X 24GB
The Bykski B-FRD-Tesla-A30X-24G is an all-in-one liquid cooler for the NVIDIA A30X 24GB PCIe accelerator. It replaces the card’s factory passive heatsink with a full-cover water block and backplate. An inline pump circulates coolant through the preassembled loop to a fan-cooled 360 mm radiator that mounts to the chassis.
Compatibility
Bykski’s confirmed board layout
- ✓NVIDIA A30X 24GB Converged Accelerator (PCIe Gen4, full-height, full-length, dual-slot)
Before ordering, match your card’s PCB layout and mounting holes to the board shown here.
Design Highlights
360 mm radiator with an inline pump
The single-card kit pairs an aluminum radiator with three fans. Braided hoses connect the radiator and the water block, with the pump mounted in the tubing.
Full-cover T2 copper cold plate
The block mounts over the A30X board. The copper cold plate takes heat from the GPU, memory, and the power components marked in Bykski’s pad diagram.
0.3 mm jet microchannels
Coolant flows through up to 44 microchannels in the cold plate. The channels increase the surface area in contact with the coolant.
Key Specifications for the 360 mm Single-Card Kit
| Model | B-FRD-Tesla-A30X-24G-360 |
|---|---|
| Cold plate | T2 copper |
| Block and backplate (L × W × H) | 267.5 × 99.8 × 27.3 mm, from Bykski’s drawing |
| Radiator | 360 mm aluminum radiator with 12 coolant channels |
| Radiator length | 396 mm in Bykski’s drawing |
| Fans | 3 radiator fans |
| Pump | Inline |
Which Version Do I Need?
Check the card label for A30X. NVIDIA’s A30 and A30X both have 24 GB of GPU memory. The A30X combines the A30 GPU and a BlueField-2 DPU on one board.
What’s in the Box for the 360 mm Single-Card Kit
Thermal paste is not included (it cannot be shipped by air). Please use your own GPU thermal paste during installation.
Installation & Use
You’ll need your own GPU thermal paste, a chassis with a 360 mm radiator mount, and compatible power connections for the pump and fans.
FAQ
How is the NVIDIA A30X cooled from the factory?
NVIDIA specifies passive cooling for the A30X. This kit replaces the stock heatsink and moves heat to a fan-cooled radiator.
Do I need to buy a separate pump?
The kit includes an inline pump in the tubing between the water block and radiator.
Will it fit in my case?
Check for a 360 mm radiator mount and space for the radiator and fans together. Bykski’s single-card drawing shows a 396 mm radiator length. Leave room for the hoses and inline pump between the radiator and card.
How do I check that my card will fit?
Confirm the exact NVIDIA A30X 24GB model, then compare your PCB and mounting holes with the photo under Compatibility.
- For any questions, please contact customer service.













