Bykski
PELADN RTX 4090 24GB AIO Liquid Cooler, 360 mm | Bykski B-FRD-PL4090
360 mm AIO liquid cooling for the PELADN RTX 4090
The Bykski B-FRD-PL4090 is an all-in-one liquid cooler that replaces the stock cooler on a compatible PELADN GeForce RTX 4090 24GB. Its full-cover copper block draws heat from the GPU, memory, and power stages. Coolant carries that heat to a 360 mm radiator.
Compatibility
Graphics card listed by Bykski
- ✓PELADN GeForce RTX 4090 24GB
Before ordering, confirm that your exact PCB revision is supported by the kit you select.
Design Highlights
0.3 mm jet microchannels in the B-FRD-PL4090-360 drawing
Bykski’s single-card drawing shows fine channels that increase the surface area where coolant picks up heat from the cold plate.
Single-card loop
Bykski’s B-FRD-PL4090-360 assembly drawing shows the inline pump between the GPU block and the radiator, connected by braided tubing.
Key Specifications
| Model | Bykski B-FRD-PL4090 |
|---|---|
| Cooling coverage | GPU core, memory, and power stages |
| Cold plate | Copper |
| Jet microchannels | 0.3 mm (B-FRD-PL4090-360 single-card factory drawing) |
| Block assembly | 290.09 × 126.33 × 17.50 mm (single-card drawing) |
| Radiator class | 360 mm |
| Included radiator fans | 3 × 120 mm, each 25 mm thick (both kits) |
| Radiator thickness with fans | 63 mm for both kits (38 mm radiator + 25 mm fans) |
| Single-card pump | Inline |
| Single-card tubing | Braided tubing |
Which Version Do I Need?
Match the card’s PCB first, then choose the kit for your card count. Both kits are 63 mm thick with the fans fitted.
What's in the Box
Both kits arrive with the tubing connected and coolant already filled.
Thermal paste is not included (it cannot be shipped by air). Please use your own GPU thermal paste during installation.
Installation & Use
You’ll also need GPU thermal paste and a screwdriver that fits the included mounting hardware. Check the thermal pad requirements for your exact PCB before removing the original cooler.
FAQ
Do I need to buy a pump or add coolant?
Both kits include a pump and arrive prefilled with the tubing connected.
Will the 360 mm kit fit my case?
Look for a 360 mm radiator mount with 63 mm of clearance for either kit. Check overall radiator length and tubing reach before ordering. Current kits ship with the 38 mm radiator; total thickness with fans is 63 mm (older drawings may show 52 mm).
What does the -H suffix mean?
B-FRD-PL4090-360-H pairs two GPU blocks and two matching backplates with one 360 mm radiator. Each card needs the supported PELADN PCB layout.
Is the GPU die the only area the block cools?
The full-cover block also cools the memory and power stages.
- If the block fails to line up with the mounting holes, stop and have a technician check the fit before tightening the screws.











