Bykski
RTX 3090 / RTX 3080 AIO Liquid Cooler, Bykski B-FRD-PL3090 for CANDEUS Aotron RTX 3090 AI 24G & Select PCBs
All-in-one liquid cooling for select GeForce RTX 3090 and RTX 3080 cards
The Bykski B-FRD-PL3090 is an all-in-one GPU liquid cooler for select GeForce RTX 3090 and RTX 3080 boards, including the CANDEUS Aotron GeForce RTX 3090 AI 24G. Its full-cover block takes heat from the GPU, memory, and power stages to a case-mounted radiator. The standard 360 mm version has a pump in the tubing.
Compatibility
Bykski lists these specific GeForce RTX 3090 versions
- ✓NVIDIA GeForce RTX 3090 Turbo Edition (24 GB)
- ✓CANDEUS Aotron GeForce RTX 3090 AI 24G
Bykski also lists ZOTAC GeForce RTX 3080 and Manli GeForce RTX 3080 PCB layouts. Match the exact board before choosing this kit.
Before ordering, compare your card’s PCB, mounting holes, and component positions with the corresponding board layout.
Design Highlights
Inline pump on the single-card version
In Bykski’s standard 360 mm layout, the pump sits in the tubing between the GPU block and the radiator. Mount the block on the card and the radiator at a 360 mm case mount.
Full coverage for the GPU, memory, and power stages
The T2 copper cold plate takes heat from the GPU die through thermal paste and from the memory and power stages through thermal pads. The block uses 0.3 mm jet microchannels.
Key Specifications
| Model | Bykski B-FRD-PL3090 |
|---|---|
| Cold plate | T2 copper |
| Block dimensions | 278.20 × 96.95 × 17.30 mm |
| Microchannels | 0.3 mm, jet type |
| Radiator | 360 mm aluminum |
| Standard 360 mm radiator length | 396 mm in the Bykski drawing |
| Radiator fans (pictured) | 3 in each 360 mm configuration |
| Standard 360 mm inline pump (rated) | 7,000 RPM, 450 L/h, 7 m head |
Which Version Do I Need?
Choose by the number of GPUs you want to cool. Check each card’s PCB and the case’s radiator clearance first.
Use the full card name when comparing RTX 3090 versions, especially Turbo Edition and Founders Edition. If you already have a custom liquid loop, look for a standalone block made for your exact PCB.
What's in the Box
Confirm the accessory list for your selected version before ordering.
Thermal paste is not included (it cannot be shipped by air). Please use your own GPU thermal paste during installation.
Installation & Use
You also need your own GPU thermal paste and a case with room for the radiator, fans, and tubing. Check which pads and mounting hardware your board needs.
FAQ
Can I use this cooler on my ZOTAC or Manli RTX 3080?
Check the full card model and PCB first. Bykski lists ZOTAC and Manli RTX 3080 board layouts, so the PCB determines fit.
What does the -360-H suffix mean?
It identifies the dual-card kit with two GPU blocks and a thicker 360 mm radiator. Verify the PCB on both cards before ordering.
Do I need a separate pump for the standard 360 mm version?
The standard 360 mm design uses the inline pump shown between the GPU block and radiator. That layout needs no separate pump.
What case will this kit fit?
Look for a case with a 360 mm radiator mount. Check the radiator’s length, the depth with fans, and the tubing route from the mount to the GPU. The standard 360 mm radiator drawing shows an overall length of 396 mm.
- If the block or screw holes do not line up, stop and check the fit before tightening anything.













