• FormulaMod Official Store 0
    Cart Total: items

    Your cart is currently empty..

Bykski

RTX 3090 / RTX 3080 AIO Liquid Cooler, Bykski B-FRD-PL3090 for CANDEUS Aotron RTX 3090 AI 24G & Select PCBs

stars, based on ( 0 ) review
items available
Contact Us
FormulaMod Official Store
Bykski · B-FRD-PL3090

All-in-one liquid cooling for select GeForce RTX 3090 and RTX 3080 cards

The Bykski B-FRD-PL3090 is an all-in-one GPU liquid cooler for select GeForce RTX 3090 and RTX 3080 boards, including the CANDEUS Aotron GeForce RTX 3090 AI 24G. Its full-cover block takes heat from the GPU, memory, and power stages to a case-mounted radiator. The standard 360 mm version has a pump in the tubing.

Fits
RTX 3090 Turbo Edition, RTX 3090 AI 24G & select RTX 3080 boards
Radiator
360 mm aluminum
Cold plate
T2 copper
Standard 360 mm
Inline pump

Compatibility

Bykski lists these specific GeForce RTX 3090 versions

  • ✓NVIDIA GeForce RTX 3090 Turbo Edition (24 GB)
  • ✓CANDEUS Aotron GeForce RTX 3090 AI 24G

Bykski also lists ZOTAC GeForce RTX 3080 and Manli GeForce RTX 3080 PCB layouts. Match the exact board before choosing this kit.

Before ordering, compare your card’s PCB, mounting holes, and component positions with the corresponding board layout.

Bykski B-FRD-PL3090 PCB reference drawing showing mounting holes, the GPU area, and the connector edge

PCB layout reference (Bykski drawing)

Design Highlights

Bykski B-FRD-PL3090 single-card cooler at an angle showing the radiator, inline pump, tubing, and GPU block

Inline pump on the single-card version

In Bykski’s standard 360 mm layout, the pump sits in the tubing between the GPU block and the radiator. Mount the block on the card and the radiator at a 360 mm case mount.

Bykski B-FRD-PL3090 copper cold plate with a square GPU contact surface and adjacent machined contact areas

Full coverage for the GPU, memory, and power stages

The T2 copper cold plate takes heat from the GPU die through thermal paste and from the memory and power stages through thermal pads. The block uses 0.3 mm jet microchannels.

Key Specifications

ModelBykski B-FRD-PL3090
Cold plateT2 copper
Block dimensions278.20 × 96.95 × 17.30 mm
Microchannels0.3 mm, jet type
Radiator360 mm aluminum
Standard 360 mm radiator length396 mm in the Bykski drawing
Radiator fans (pictured)3 in each 360 mm configuration
Standard 360 mm inline pump (rated)7,000 RPM, 450 L/h, 7 m head
Bykski B-FRD-PL3090 GPU block dimension drawing with face and side views

GPU block dimensions in mm (Bykski drawing)

Which Version Do I Need?

Choose by the number of GPUs you want to cool. Check each card’s PCB and the case’s radiator clearance first.

360 mm · Single GPU
Choose B-FRD-PL3090-360 for one compatible graphics card.
360 mm Thick Row · Dual GPU
Choose B-FRD-PL3090-360-H for two compatible cards. It uses two GPU blocks and one thicker 360 mm radiator.

Use the full card name when comparing RTX 3090 versions, especially Turbo Edition and Founders Edition. If you already have a custom liquid loop, look for a standalone block made for your exact PCB.

What's in the Box

Standard 360 mm shown with 1 GPU block, an inline pump, tubing, and a radiator with 3 fans360 mm Thick Row shown with 2 GPU blocks and 1 radiator with 3 fans

Confirm the accessory list for your selected version before ordering.

Thermal paste is not included (it cannot be shipped by air). Please use your own GPU thermal paste during installation.

Bykski B-FRD-PL3090-360-H render showing two GPU blocks in front of one three-fan radiator

Dual-card version (product rendering)

Installation & Use

1
Turn off and unplug the system. Remove the graphics card and its stock cooler, then clean residue from the GPU and PCB contact areas.
2
Fit the appropriate thermal pads at the marked memory and power-stage positions. Apply your GPU thermal paste to the GPU die.
3
Align the GPU block’s mounting posts with the screw holes in the card’s PCB before tightening.
4
If your card uses a backplate and you ordered a block configuration with a matching backplate, secure it with the corresponding backplate screws.
5
Mount the radiator and fans at a 360 mm case mount. Check clearance behind the fans and route the tubing without sharp bends.
6
Check the radiator fan connectors against your motherboard or controller manual before connecting the fans. On the standard 360 mm version, do the same for the inline pump. At startup, verify that the parts you connected are running.

You also need your own GPU thermal paste and a case with room for the radiator, fans, and tubing. Check which pads and mounting hardware your board needs.

Bykski B-FRD-PL3090 installation drawing with thermal pad positions around the GPU and on the power stages

Place thermal pads on the shaded memory and power-stage areas. The center square marks where thermal paste goes.

FAQ

Can I use this cooler on my ZOTAC or Manli RTX 3080?

Check the full card model and PCB first. Bykski lists ZOTAC and Manli RTX 3080 board layouts, so the PCB determines fit.

What does the -360-H suffix mean?

It identifies the dual-card kit with two GPU blocks and a thicker 360 mm radiator. Verify the PCB on both cards before ordering.

Do I need a separate pump for the standard 360 mm version?

The standard 360 mm design uses the inline pump shown between the GPU block and radiator. That layout needs no separate pump.

What case will this kit fit?

Look for a case with a 360 mm radiator mount. Check the radiator’s length, the depth with fans, and the tubing route from the mount to the GPU. The standard 360 mm radiator drawing shows an overall length of 396 mm.

Notes
  • If the block or screw holes do not line up, stop and check the fit before tightening anything.

FormulaMod Official Store

Recent Reviews
+